Font Size: a A A
Keyword [Coated cemented carbide]
Result: 1 - 20 | Page: 1 of 2
1. Fundamental Research On Preparation And Properties Of ZrTiN Gradient Coated Tools
2. Study On The Cemented Carbide Tools With Fe And Ni Binder Phase For Steel Cutting
3. Study On Cutting Performance Of Coated Cemented Carbide Tools
4. Preparation And Applied Basic Research Of CVD Diamond Coated Cemented Carbide Cutting Tools With High Cobalt Content
5. Sunthesis Of Metal Interlayer Of Diamod-coated Cemented Carbide Cutting Tools By Double Golw Plasma Surface Alloying Technique
6. Research On Properties And Structure Of TiAlN Coatings On Cemented Carbide Cutting Tools By Ion Plating
7. Study On Cutting Performance Of Coated Cemented Carbide End Milling Tool In High-speed Milling Of Titaniumalloy
8. Matrix Influence On The Organization And Performance Of Coated Cemented Carbide
9. Experimental Comparative Study On PVD/CVD Coated Cemented Carbide Insert During Cutting Of Austenitic Stainless Steel
10. The Properties Of Ti(Cr,Al)Sic(O)N Coatings And The Coated Cemented Carbide Tools
11. The Synthesis And Performance Studies Of Ta_xC Interlayers For Cvd Diamond Coated Cemented Carbide
12. Research On Preparation And Milling Performance Of AlTiN/AlCrN Coated Cemented Carbide Milling Cutter
13. Research On Key Technologies Of Recycling And Utilization Of Coated WC-Co Hardmetal Scrap
14. Performance Of Coated Cutting Tools In Turning A Malleable Cast Iron
15. Research On Wear Mechanisms Of Coated Cemented Carbide Tool In Turning Of Titanium Alloy
16. Cryogenic Treatment Effects On Microstructure And Performance Of TiAlN Coated Cemented Carbide Tools
17. The Study On Pretreatment Of Diamond Coated Cemented Carbide Substrate Based On The Coupling Of Spray Cooling And Laser Etching
18. Research On The Cohesive Strength And Cutting Performance Of The CMP Pretreated Coating Cemented Carbide Inserts
19. Research On Cutting Performance And Tool Reliability During Milling Of Compacted Graphite Iron By Coated Cemented Carbide Tool
20. Study On Thermal Stability Of Nitride Coated Cemented Carbide Cutting Tools
  <<First  <Prev  Next>  Last>>  Jump to