Control of microstructure and properties - Globe Thesis

Keyword [Control of microstructure and properties] Result: 1 - 20 \| Page: 1 of 2
1.	Research On Flexible Control Of Microstructure And Properties Of High Strength Nb Bearing Hot-Rolled Dual Phase Steel
2.	Control Of Microstructure And Properties Of TiC/Ti6Al4V Composites Manufactured By Laser Melting Deposition
3.	Research On Characteristics And Control Of Microstructure And Properties Of Narrow-gap Laser Weldind With Filler Wires For Thick 7A52 Aluminum Alloy Plate
4.	Control Of Microstructure And Properties Of 6000 Series High Strength And High Plasticity Aluminum Alloy By Alloying Elements And Heat Treatment Process
5.	Control Of Microstructure And Properties On Aluminum Alloy Under The Integrated Large Strain Technology Of Extrusion-Bc Route Equal Channel Angular
6.	Study On Control Of Microstructure And Properties And Mechanisms For Non-Magnetic Ti(C,N)–Ni-Based Cermets
7.	Comprehensive Control Of Microstructure And Properties Of Cu-Ti Alloy Prepared By Aluminothermic Method
8.	Control Of Microstructure And Properties Of Cu-(Ni)-Mo Alloys Prepared By Aluminothermic Reaction
9.	Research On The Control Of Microstructure And Properties Of Pre-hardened Plastic Mold Steel 2Cr2MnNiMoV
10.	Powder Near-net Shaping Technology And Control Of Microstructure And Properties Of UNS S32707 Hyper-duplex Stainless Steel Parts
11.	Study On The Nonuniformity And Control Of Microstructure And Properties Of Cold-sprayed Deposits
12.	Quantitative Control Of Microstructure And Properties Of Multicomponent And Multiscale SiCp/6061Al Aluminum Matrix Composites
13.	Optimization Of Heat Treatment Process And Control Of Microstructure And Properties Of 2195 Al-Li Alloy Sheet
14.	Study On Control Of Microstructure And Properties Of Ti Microalloyed Low Carbon Steel
15.	Characterization And Control Of Microstructure And Properties Of Linear Friction Welding Joint Of TC4/TC17 Heterogeneous Titanium Alloy
16.	Research On Hot Rolling Technology And Control Of Microstructure And Properties Of High-strength α+β Titanium Alloy Seamless Tube
17.	Reasearch On The Control Of Microstructure And Properties And Strengthening Mechanism Of Air-hardening Steel For Automobile
18.	Study On Microstructure And Properties Control And Composition Optimization Design Of Inconel 738 Alloy By Selective Laser Melting
19.	Control Of Microstructure And Properties Of CC3003 Aluminum Alloy Sheet By Electric Pulse Assisted Process
20.	Control Of Microstructure And Properties Of Wire And Arc Additive Manufactured Titanium Alloy With An Heterogeneous In-situ Enhanced Structure
<<First <Prev Next> Last>> Jump to