Font Size: a A A
Keyword [Creep Fracture]
Result: 1 - 20 | Page: 1 of 2
1. Investigation Of Fatigue Creep Behavior And Life Estimation Of Pressure Vessel Steel 1.25Cr0.5Mo At High Temperature
2. Study On The Microstructure And Mechanical Properties Of High Strength Heat Resistant Mg-Gd-Nd-Zr Alloys
3. Research On Interfacial Failure Behavior And Interfacial Toughness Enhancement Of Foam Core Sandwich Composites
4. Welding Repair Technology For Life Extension Of Ethylene Cracking Furnace Tubes
5. Investigation On The Fatigue Behavior Of A New Al Alloy And SiC_p/Al Composites Used For Piston
6. Solution For Creep Fracture Mechanics Parameter C~* Based On Reference Stress Method And Application In Engineering
7. Influence Of Fiber Contents On Creep Behavior Of Al2O3-SiO2 /AZ91D Composite
8. Study On High Temperature Creep Fracture Mechanics Parameter Of Homogeneous Tension Specimen Based On Reference Stress Method
9. Analysis On Microstructare Of T92Steel After High Temperature Multiaxial Creep
10. Research On Microstructure Modification And Creep Performance Of Mg2Si/Mg-Sn Composite
11. Elevated-temperature Deformation, Strengthening And Fracture Mechanisms In Cast Creep-resistant Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) Magnesium Alloy
12. Experimental Study On Mechanical Properties Of Static Fracture And Creep Fracture Behaviors Of Gypsum Interlayers In Corrosive Environmentn Of Brine
13. Effect Of Notch Geometry Constraint On Creep Damage And Fracture Behavior In Alloy Steel And Welded Joint
14. Study Of Viscoelastic Behaviors Of Rock And Creep Crack Propagation In Unconventional Reservoirs
15. The Effect Of Replacing W By Mo On The Microstructure And Properties Of Waspaloy Ni-based Alloy
16. The Effects Of Fe On The Mechanical Behaviour Of TA15 Titanium Alloy
17. Experiment Research On Rock Mechanics And Determination Of Reasonable Production Pressure Difference
18. Study On The Creep Crack Growth Property Of PE100 Pipe And Butt-fusion Joint
19. Effects of mechanical and metallurgical variables on creep, fracture toughness and crack growth behavior of Alloy 617
20. Creep and creep fracture of zirconium and zirconium alloys
  <<First  <Prev  Next>  Last>>  Jump to