Font Size:
a
A
A
Keyword [Creep crack]
Result: 1 - 20 | Page: 1 of 2
1.
Room Temperature Creep At Crack Tip In SUS304 Stainless Steel And Its Influence On Fatigue Crack Growth
2.
Studies On Crack Propagation Under Fatigue-creep Combined Action Of 316L Steel At High Temperature
3.
Study On The High-temperature Creep Behavior And The Estimation Of Creep Crack Parameter C～* Of Cracks In Bi-material CT Specimen
4.
Analysis Of The Creep Crack Growth Rate In P92 Welded Joint HAZ
5.
Analysis Of Creep Crack Growth Of P92 Steel With Residual Stress
6.
Analysis And Quantitative Characterization Of Creep Constraint Effect Induced By Specimen Geometries
7.
Fabrication And Mechanical Properties Of Al/Al-Cu Graded Materials With Compositional Continuous Change
8.
The Flame Tube Mixing Hole Edge Micro-thermal Stress And Crack Propagation Studies
9.
Effects Of Residual Stress On Creep Damage And Fracture In Notched CT Specimens
10.
Research On The Methodology For High Temperature Creep Based On Energy And Dimensional Analysis
11.
Fabrication And Creep Crack Growth Behavior Of Al/Al-4%Cu Graded Materials
12.
Effect Of Residual Stress On Creep Crack Initiation And Growth For Specimens With Different Geometric And Material Constraints
13.
Effects Of Interaction Between Geometry And Material Constraint On Creep Crack Growth Behavior In P92 Welded Joints
14.
The High Temperature Life Assessment System For P91 Key Components Containing Defect In Supercritical Unit
15.
Numerical Study Of The Different Constraints Effect On Creep Crack Growth Behavior
16.
Effect Of Microstructure On Creep Crack Growth Behavior Of 2219 Aluminum Alloy
17.
Characterization Of The Creep Crack-tip Constraint Effects Based On The C*-Q* Two-Parameter Theory
18.
Prediction Of Creep Crack Initiation In Weld Joint Of P92 Pipes With Strip Defects
19.
Investigation Of Creep Crack Growth Of P92 Steel Under Unsteady And Steady State
20.
Study On Unified Parameter Of In-plane And Out-of-plane Creep Constraint Based On Crack-tip Equivalent Creep Strain
<<First
<Prev
Next>
Last>>
Jump to
