Font Size: a A A
Keyword [Cutter]
Result: 1 - 20 | Page: 1 of 10
1. Research On The Theory & Technology Of Measurement For Characterized Curves Of Complex Helicoidal Surfaces
2. Study On New Process Of Twin-Screw And Its Supporting System
3. Development Of Nano Modified Ceramet Cutter And Its Digital Design For The Geometical Parameters
4. Research On Technology Of Twin-cutter NC Turning Programming
5. Dynamics Optimization Design On Parallel CNC Cutter Grinding Machine Tool
6. Study On Action Mechanism And Experiment With Water Vapor As Coolants And Lubricants In Green Cutting
7. Research Of Key Technologies Of Physical Simulation Of NC Milling Machining
8. Theoretical And Experimental Research On Rock Fragmentation Under Coupling Dynamic And Static Loads
9. Research On Ultra-fine Ti(C, N) Based Cermet Cutter And Its Cutting Behavior
10. Research On The Lateral Vibration Control Of High-speed Rotating Disk Slice Cutter
11. Research On The Matching Characteristic And The Application Of Lengthened Shrink-fit Holder And Cutter In High Speed Milling
12. Study On Cutting Stability And Structural Design Method Of High Speed Face Milling Cutter
13. Simulational And Experimental Study On The High Speed Milling Process For Aerospace Aluminum Alloy With Multi-flutes Milling Cutter
14. Research And Practice Of Tool Path Generation In NC Programming For Complex Multi-surfaces
15. Application Study And Personalized Design Of PDC Bits Under Complex Geological Condition
16. Design And Experimental Study On Artificially Ordered Super-hard Fiber Cutters
17. Research On Technology Parameters Of Electrical Discharge Grinding Of Diamond Woodworking Cutter Based On Grey Theory
18. Research On Complete Sets Of Mechanical Polishing Technology For Aluminum Wheel Hub Surface
19. Fundamental Research On Machine Tool, Cutting Tool And Cutting Mechanism For Micro-Milling
20. Construction Of An Open Architecture Cnc System And A Series Of Study Of Its Key Technologies
  <<First  <Prev  Next>  Last>>  Jump to