Cutting Parameters - Globe Thesis

Keyword [Cutting Parameters] Result: 181 - 200 \| Page: 10 of 10
181.	Research And Development Of Expert System For Cutting Parameters Optimization Of Web-based Deep Hole Drilling
182.	Research On Cutting Heat Simulation Of Micro-milling Machining
183.	Research On Rock Breaking Mechanism Of Composite Drilling PDC Bit
184.	Research On Milling Process And Cutting Parameters Inversion Of Splicing Die With Different Hardness
185.	Machining Parameters Prediction Research Of BTA Drilling Based On The GABP Neural Network
186.	Study Of Optimization Of High Speed Cutting Parameters For Nickel-based Superalloys
187.	Study On The Medical Stainless Steel Turning With Different Coating Tools
188.	Study On Drilling Simulation And Experiment Of Internal Cooled Drill
189.	Experimental Study On 3D Laser Cutting IMD Diaphragm
190.	Influences Of Cutting Fluid Conditions And Cutting Parameters On Surface Integrity Of Inconel-718 Under Dry And High Pressure Coolant (HPC)Machining
191.	Study On Surface Integrity For Machining Superalloy With High-pressure Coolant By PCBN Tools
192.	Study On Finite Element Simulation And Parameter Optimization Of Milling 2219 Aluminum Alloy
193.	Research On Optimization Of NC Milling Parameters By The Applied Finite Element
194.	Determination And Quick Selection Of Milling Parameters Of The Gantry Machine Tools Based On Analysis Of Static And Dynamic Characteristics Of Milling Head
195.	Research On Milling Simulation Of Thin-walled Parts And Secondary Development Of Its Platform
196.	Study On The Improvement Of Ti6A4lV Titanium Alloy Gun Drilling Technology For Small Diameter Deep Hole Drilling
197.	Influence Of Both Surface Roughness Of Carbide Inserts And Cutting Parameters On Residual Stresses In Thin-Walled Cylinder Turning
198.	Surfaces Roughness Based Optimization Of Both Polishing Parameters And Cutting Parameters Of Chemical-Mechanical Polished Carbide Inserts
199.	Study On Influence Of Pre-mixed AWJ Cutting Parameters On Cutting Effect Of Stainless Steel Under Low Pressure Conditions
200.	Optimization Of Cutting Parameters And Study Of Surface Topography In Turning Of Ti6Al4V
<<First <Prev Next> Last>> Jump to