Cutting fluid - Globe Thesis

Keyword [Cutting fluid] Result: 1 - 20 \| Page: 1 of 5
1.	Theoretical Analysis Of Atomization Mechanism And Experimental Study Of Oils On Water (OoW) Cutting Fluid
2.	Study On The Mechanism Of MQL Cutting And Its Application Fundament
3.	The Preparation Of Macromolecular Flocculants And Water Based Cutting Fluid Wastewater Treatment
4.	Study On Environment-protection Cutting Fluid And Its Working Mechanism
5.	Study On New Green Water-based Cutting Fluid And Its Mechanism
6.	Optimum Design Of Environment Friendly Based Synthesized Cutting Fluidand Metal Working Water
7.	Research On The Preparation And The Application Of New Maleopimaric Acid Diethanolamine Antirust
8.	Metal-Cutting Fluid Purification Equipment
9.	Research On Rust-inhibiting And Anti-corrosion Performances Of Water-based Microemulsion Cutting Fluid
10.	Synthesis And Application Of Extreme Pressure And Anti-wear Additives Nitrogen-containing Borate
11.	Research On Biostability Of Water-based Metal Cutting Fluid
12.	Experimental Study Of Tool Wear In Diamond Cutting Of Optical Glass
13.	Cutting Fluid And The Process Parameters Of The Research
14.	Research On Efficient Shaving Process And Environmental Protection Cutting Fluid
15.	Study On Cutting Fluid In Environmental Organic Wastewater Treatment By Fenton-MBR
16.	Study Of Influence Of Cutting Fluid On Surface Quality With Milling N-87Material
17.	Basic Research On Cutting-off Of Glass-ceramic By Diamond Wire Saw
18.	Research On Lubricity And Anti-corrosion Performance Of Aluminum Alloy6061and7075in Micro-emulsion Cutting Fluid
19.	Research Of Deep Hole Drilling Cutting Fluid Cooling System Based On Heat Transfer Enhancement
20.	Structural Aspects Of Surfactants On The Stability Of Semi-Synthetic Metalworking Fluids
<<First <Prev Next> Last>> Jump to