Cylindrical - Globe Thesis

Keyword [Cylindrical] Result: 21 - 40 \| Page: 2 of 10
21.	Research And Application On Forming Limiting Of Cylindrical Cup Drawing Based On BP Neural Network
22.	Research On The Cold Extruding Of Involute Cylindrical Gear Spline
23.	The Optimum Design Of Carbide Cylindrical Finish Machining Gear Hobs And Its 3D Sculpt
24.	FEM Numerical Simulation On Power Spinning Of Cylindrical Workpiece
25.	Research Of On-line Measurement Of Surface Roughness During Cylindrical Grinding Process
26.	A Hybrid Cylindrical Model For Characterization Of MCM-41 By The GCMC Method And Density Functional Theory
27.	Experimental Investigation And Numerical Simulation Of The Gas Flow Field In The Cylindrical Three-phase Cyclone With A Vaned Inlet And A Direct-current Outlet
28.	A Study Of Limit Load For Cylindrical Shells With Reinforcement Pad Under Nozzle Moment
29.	Revese Manufacture Of Industry Sartorius's Cylindrical Cam
30.	Study The Gas-liquid-sand Three-phase Hydrocyclone
31.	The Simulation Analysis Of Machining Property Of Cylindrical Worm And Worm Wheel
32.	Structural Properties Of Glass Fibre Reinforced Cylindrical Laminated Veneer Lumber
33.	The Study And Development On Hardware Of Online Measurement Application System Of Cylindrical Grinder
34.	Radial Run-out Measuring System Improvement And Error Compensation Of Cylindrical Gear
35.	Numerical Simulation Research On Seismic Analysis Of Large Cylindrical Storage Tanks
36.	Investigation Of The Flow Field In The Cylindrical Three-phase Cyclone With A Vaned Inlet And A Direct-current Outlet And Structural Analysis Of Three-phase Cyclone
37.	Study On Static Strength And Dynamic Response Of The Large Oil Storage Tank
38.	The Study On An Energy-absorbing And Buffering Of The Layer-combined Cylindrical Shell And Simulation
39.	Flow Of Polymer Solution Through Zonal Injection Allocation Of Cylindrical Cavity With Nozzle And Jet Target
40.	The Research On Applying Adaptive Control To Grinding Process
<<First <Prev Next> Last>> Jump to