Font Size: a A A
Keyword [Cylindrical parts]
Result: 1 - 20 | Page: 1 of 3
1. Microstructures And Properties Of Cylindrical Parts Of SiCp Reinforced Al Matrix Leaping Functionally Graded Materials Manufactured By Centrifugal Casting
2. The Stamping Process Design And Simulation Of Small Parts
3. Research On Forming Method And Experiment Of Nanocrystalline/Ultra-fine Grain Structure Cylindrical Parts By Counter-roller Spinning
4. Research On Composite Sheet Of Cylindrical Parts Solid Particles Medium Forming Process
5. Research On Weld Moving Low Of TWBS Cylindrical Parts Formed By SGMF Crafts
6. The Design Of Ultrasonic Rolling Device And The Study Of Processing
7. Influence Of Mold Parameters On Residual Stresses In304Stainless Steel Drawing Cylindrical Parts
8. Research On Thickness Variation Of Cylindrical Parts In Deep Drawing Processing
9. Research On Forming Method Of Difficult-to-deform Metal In Hot Power Spinning
10. Research On The Cylindrical Cups With Concave Bottom Forming By Hydrodynamic Deep Drawing With Inverse Bulging Base On Numerical Simulation
11. Research On Formation Condition Of Nano/Ultrafine Grained Structures During Power Spinning Of Cylindrical Parts
12. Structure And Properties Of Al-xSi-9Ni Functionally Graded Composites Reinforced With In-situ Particles
13. Simulation Of The Process Of Large-scale Roll-formed Tubular Member
14. Research On Forming Mechanism Of Nano/Ultrafine Grained Cylindrical Parts By Power Stagger Spinning
15. Research On Drawing Forming Of Calindrical Parts Of Tailor Welded Blanks
16. Research On Control Technology To Combination Machining Platform For Complex Cylindrical Type Parts Special
17. Research On Theory And Technology Of Online Phased Array Ultrasonic Imaging For Cylindrical Components
18. Numerical Simulation And Experimental Research On Hot Spinning Of Light Alloy Typical Thin-wall Rotatory Workpieces
19. Finite Element Analysis And Experimental Research On Deep Drawing Process For Cylindrical Cup Based On Radial Segment Blank Holders
20. Research On Effects Of Boss Forming On Cylindrical Parts Bottom In Plate Forging Process
  <<First  <Prev  Next>  Last>>  Jump to