Die casting - Globe Thesis

Keyword [Die casting] Result: 181 - 200 \| Page: 10 of 10
181.	For The Shrinkage Characteristics Of The Die-casting Mold Temperature Field Simulation Study
182.	Analysis And Control Of The Main LPDC Defects Of Aluminum Alloy Wheels
183.	Semi-solid Al-23Si-4.5Fe-3Cu-1Mg Alloy Slurry Fabricated By Rotating Induced Nucleation And Rheo-diecasting
184.	High Pressure Die-casting Process Simulation And Mold Design For A Aluminum Alloy Cylinder Block
185.	Research On The Process Of Aluminium Alloy Wheel Low Pressure Casting And Equipment
186.	Research On The Al-Si Die Casting Alloy With High Cu Content And Its Heat Treatment
187.	Numerical Simulation And Craft Researching Of Shelling Part Die Casting Filling And Solidification Process
188.	Numerical Simulation Of The Whole Process Of Aluminium Alloy Die Casting Filling And Solidification
189.	The Research Of The Alluminum Casing Joint Low Pressure Die Casting Mould Design And Process Opotimization
190.	Controlling Theory Of Bulk Amorphous Forming Process And Preparation Of Al-based Bulk Amorphous With Large Size
191.	Research On The Design And The Dynamic Characteristics Of Three-Way Electro-Hydraulic Servo Cartridge Valve With Large-Flow Rate
192.	Study On The Three-Dimensional Reconstruction Of The Casting Microstructure
193.	Research On Crystallization Solidification Process And Formation Mechanism Of Pore Defect For Complex Aluminum Alloy Die Casting
194.	Properties Research Of Die-casting AZ91 Mg Alloy Based On Carbon Nanotube Composites
195.	Study On The Manufacturing Processes Of New Style Steel For Large Die Casting Die
196.	Reseach On AZ91D Magnesium Alloy Motrocycle Wheel Produced By Combination Process Of Die-casting And Forging
197.	The Research Of Die Casting Machine's Real-time Control System Based On ARM
198.	Study On Corrosion Resistance Of Vacuum Die-Cast AZ91 Magnesium Alloy
199.	Research And Development On Key Technology Of Temperature Control For Big-size And Complex Die Casting Molds
200.	Study On Rheo-die-casting Process Of Semi-solid Aluminum Alloy Slurry With Indirect Ultrasonic Vibration
<<First <Prev Next> Last>> Jump to