Electromagnetic brake - Globe Thesis

Keyword [Electromagnetic brake] Result: 1 - 20 \| Page: 1 of 2
1.	Numerical Analysis Of The Electromagnetic Continuous Casting Process In The Thin Slab Funnel Shape Mold
2.	Study On Flow Field Control In Continuous Casting Mold By Electromagnetic Field
3.	Study On The Continuous Casting Of Clad Aluminum Ingot
4.	The Process For Clad Metal Of Al-Si And Al-Mg Under Direct Electromagnetic Field
5.	The Research For Continuous Casting Of Clad Metal With Electromagnetic Brake
6.	Numerical Simulation For Temperature And Flow Field In Mold Based On Electromagnetic Brake Technology
7.	Numerical Simulation Of Magnetic Field And Fluid Flow In Continuous Casting Mold With A New Pattern Electromagnetic Brake
8.	Structural Analysis And Safety Study On Offset Screw Pump Driving Device
9.	Numerical Simulation Of The Electromagnetic Brake Process In The Mold Of CSP Thin Slab Continuous Casting
10.	Of Liquid Metal In The Casting Process Of The Electromagnetic Control
11.	Metal Complex Layer Of Material Electromagnetic Continuous Casting Technology Research
12.	Influence Of Electromagnetic Brake On The Inclusions And Microstructures Of SPHC Steel Billet
13.	Experimental Research On Liquid Metal Free Surface Behavior Under Compound Magnetic Field
14.	Numerical Simulation Of Magnetic Field And Fluid Flow In Mold With A New Pattern Electromagnetic Brake
15.	Physical Modeling Research Of Electromagnetic Brake On Bubble Distribution And Surface Fluctuation In Slab Mold
16.	Numerical Simulation Of Fluid Flow And Related Phenomena In Thin Slab Continuous Casting
17.	Parallel Shaft Screw Pump Drive Design
18.	Numerical Simulation Research On Flow And Temperature Field Of Liquid Steel In Electromagnetic Brake Mold
19.	Numerical Simulation On Behavior Of Metal Jet And The Interface Of Steel Slag Under Magnetic Field
20.	Numerical Simulation And Physical Experiment Of Liquid Metal Flow Behavior In The Continuous Casting Mold With Vertical Electromagnetic Brake
<<First <Prev Next> Last>> Jump to