Equal channel angular - Globe Thesis

Keyword [Equal channel angular] Result: 1 - 20 \| Page: 1 of 10
1.	Investigation On Fabrication, Microstructure And Mechanical Properties Of Bulk Ultrafine-grained Copper
2.	Study On Preparation, Simulation And Grain Refinement Mechanism Of Bulk Ultrafine-grained 2A12 Al Alloy Pressed By Equal-channel Angular Pressing
3.	Microstructure And Properties Of Quasicrystal Strengthened Mg-Zn-Y Alloys Produced By Equal Channel Angular Pressing
4.	Study On The Microstructure And Mechanical Properties Of Magnesium Alloy By Equal Channel Angular Extrusion
5.	Tribological Properties Of Ti-Ni Based Alloys Fabricated By Equal Channel Angular Extrusion Processing
6.	Research On Equal Channel Angular Rolling And Drawability Of AZ31 Magnesium Alloy Sheet
7.	Numerical Simulation And Experimental Investigation Of Deformation Mechanism In Equal Channel Angular Pressing/Extrusion Process
8.	Mechanical And Tribological Properties Of Aluminum Bronze Alloy Produced By Equal Channel Angular Extrusion
9.	Research On Numerical Simulation And Experimental Investigation Of Aluminum With Porosities During Euqul Channel Angular Extrusion Process
10.	Mechanical Properties And Fracture Behavior Of Al Alloys Subjected To Equal Channel Angular Pressing
11.	Preparation And Properties Optimization Of (Bi,Sb)₂(Te,Se)₃ Based Thermoelectric Materials
12.	High Strength Mg-Y-Zn Alloys
13.	Basic Investigation On The Phenomenon Of Severe Plastic Deformation Induced Re-dissolution Of Precipitated Phases At Low Temperature And Its Application
14.	Study On Preparation Of Bulk Nanostructured Al By Equal Channel Angular Large Deformation Technology
15.	Investigation On Ductilization By Composite Of Micron-size/Ultrafine-Grained Microstructure
16.	Effect Of Back Pressure On Equal Channel Angular Pressing Of A Magnesium Alloy
17.	3D Finite Element Analysis Of Deformation Behavior Of CP-Ti During Equal Channel Angular Extrusion Process And The Texture And Corrosion Resistance Characterization Of Ultrafine-grained CP-Ti
18.	The Research Of MWCNTs/AZ31 Magnesium Matrix Composites And Equal Channel Angular Pressing
19.	Preparation, Microstructure And Mechanical Behaviors Of Ultrafine-grained Pure Ti TiNi Alloy
20.	Extrusion Processing And Low-cycle Fatigue Behavior Of Al-Mg Series Alloys
<<First <Prev Next> Last>> Jump to