Font Size: a A A
Keyword [FLUENT numerical simulation]
Result: 61 - 80 | Page: 4 of 6
61. The Research On Vortex Drainage Gas Recovery Technology Of Low-Yield Oil Wells
62. The Study Of The Influence Of High Level Borehole Extraction To Goaf Spontaneous Combustion
63. Numerical Simulation Of Fiber Slurry Flow Field Inside The Vertical Hydraulic Pulper And Development Of A New Type Of Cell Structure
64. Multiphase Numerical Simulation And Structure Optimization Of The Fold Stream UV-Fenton Reactor
65. Research On The Propertries Of Coal Dust Explosion And Technology Of Dust Fall And Explosion Suppression
66. Numerical Simulation And Experimental Study Of Hydrodynamic Cavitation Based On Orifice Plate And Jet
67. Numerical Simulation Study On Dust Movement Law Of Fully Mechanized Mining Face In Liangshuijing Mine
68. Study On Fracture Evolution Law And Application Of Overburden Rock In Fully Mechanized Caving Mining In Inclined Coal Seam
69. Simulation Of Droplet Behaviors During AZ31B Magnesium Alloy Double Arc Welding Process Based On FLUENT
70. Study Of Blasting-Fume Diffusion Regularities In Underground Stope After Blasting
71. Experiment And Numerical Study On Cooling Effects Of Water Film Plate Heat Exchanger Attacted On The Wall
72. Research On Flocculation Sedimentation Of Coal Slurry Based On Self-preserving Coagulation Dynamics
73. Structure Optimization Of Pneumatic Micro-bubble Flotation Machine Based Onnumerical Simulation
74. Numerical Simulation Research For Eddying Tube Of Revolving Water Film Deaerator
75. Design And Study Of Bilateral Powder Nozzle For Broad Beam Laser Cladding
76. The Effect Of Structural Parameters On The Wicking Properties Of Polypropylene Yarns And Fabrics
77. Study On Dust Distribution And Diffusion Mechanism In Open Pit Coal Mine
78. Study On The Spraying-stirring Preparation Technology And Structure Properties Of The Al2O3p/Al（7075） Composites
79. Study On Forming Of Ultrasonic-MIG Hybrid Welding Of Galvanized Steel Sheet
80. Simulation Research Of Flexible Glass Downdraw Forming Process
  <<First  <Prev  Next>  Last>>  Jump to