Font Size: a A A
Keyword [Face]
Result: 1 - 20 | Page: 1 of 10
1. Damage Propagation And Failure Analysis Of Damaged Composite Sandwich & Stiffened Plates
2. Research Of Safety Mining Techniques Of Shallow Work Face Under Thick Wind Sands
3. Plane Contact Type Of Structure And Stability Mechanisim In Strata Over Working Site
4. Study On Dynamics Controlling Basis Of System "R-S-F" In Steeply Dipping Seam Mining
5. Basic Study On Technology Of Pre-blast Weakening Hard Top-coal In Fully Mechanized Caving Faces
6. Preparation Of Series Sulfated Oligosaccharides And Their Structural And Sequential Analysis
7. Study On The Technology Of Gob-side Entry Retaining With Longwall Top Coal Caving System And Its Application In Lu'an Mining District
8. Study And Application On Stability Of Hard And Massive Overlying Strata In Fully Mechanized Sublevel Caving Face
9. Effects Of Elevated CO2 On Greenhouse Gases Emissions From Rice-Wheat Rotation Cropland
10. Dynamical Geology Evaluation And Controlling Methods Of The Roof Stability For Longwall Top-coal Caving Face
11. Surrounding Rock Control Theory And Application Study Of The Coal Face With Greater Mining Height
12. Study On Adaptability Of Shield Support In Large Cutting Height Working Face
13. Study On Completed Equipment Of Thinner Seam High Efficient Fully Mechanized Mining Face
14. Study On Synthesis Of Super Absorbent Resin By Inverse Suspension Method And Its Characters
15. Quality Monitoring And Control For Laser Cutting With Coaxial Visual Sensing System
16. Research On The Movement And Control Of "θ" Letter Type Overlying Milti-Strata Spatial Structures Of Face Surrounded By Mined Areas
17. Preventing Coal Bump By Appling Microseismic Locating Monitoring Technology In Longwall Face
18. Fracture Growth And Board Kind Structure And It's Non-equal Support In Surrounding Rock Of Roadway Of Fully Mechanized Caving Coal Face
19. Unstructured Quadrilateral Mesh Generation Algorithm Based On Discretized Model & Parametric Modeling Method For Sheet Metal Forming
20. Study On Cutting Stability And Structural Design Method Of High Speed Face Milling Cutter
  <<First  <Prev  Next>  Last>>  Jump to