Flow stress - Globe Thesis

Keyword [Flow stress] Result: 1 - 20 \| Page: 1 of 10
1.	Study On Some Basic Problems About Carburizing-Warmextruding Technologyf Or Spur Gear
2.	Coupled Simulation Of Deformation-Heat Transfer-Microstructural Evolution For Forging Processes Of Titanium Alloys
3.	The Mathematic Models For Flow Stress And Kinetics For Proeutectoid Ferrite Formation Of Hot-deformed Austenite Of Structural Steels
4.	Study On Behaviors Of Ferrite Warm Deformation Of Ultra Low Carbon Steels
5.	Numerical Analysis And Simulations Of H-Beam Hot Rolling Process
6.	Study On The Hydrogen Enhanced Plasticity Mechanism And Deformation Behaviors Of Titanium Alloys At High Temperatures
7.	Research On The Forming Process Simulation And Die Wear Of Semi-Hot Temperature Range
8.	Study On Experiment And Numerical Simulation Of Magnesium Alloy Sheet Metal Warm Deep Drawing
9.	Melt Hydrogenation And Its Influence On The Structures And Properties Of Titanium Alloys
10.	Simulation Of Macroscopic Behavior And Mesostructure Evolution For Hot Rolled Flat
11.	The Establishment Of Multi-scale Models And Numerical Simulation During Nb Microalloyed Steel Multi-pass Hot Rolling
12.	Study On The Plastic Deformation Behaviors Of 7075z Aluminum Alloy At High Temperatures
13.	Study On The Technical Problems Of Continuous Casting And Rolling For Aluminum Wire Rod
14.	The Behavior Of Flow Stress And The Characteristics Of Microstructure Of Aluminium Sheet Used For Easy-Open-Can During Deformation At Elevated Temperature
15.	Study On The Plastic Deformation Behaviors Of Al-8.4Zn-2.2Mg-2.4Cu Alloy At Elevated Temperatue
16.	Numerical Simulation Of The Devel Opment And Relaxation Of Flow Stresses During The Injection Molding Of Polymers
17.	The Influences Of Melt-treatment On The Flow Stress At High Temperature And Microstructure Of Aluminum Sheet Used For Easy-open-can
18.	Study On The Process And Characteristic Of Porous Aluminium By Powder Sintering
19.	Computer Simulation Of Craft Research Of Low Temperature Rolling
20.	Study On Optimization Of Isothermal Forging Process Parameter Of TA15 Titanium Alloy
<<First <Prev Next> Last>> Jump to