Fluid catalytic cracking - Globe Thesis

Keyword [Fluid catalytic cracking] Result: 81 - 100 \| Page: 5 of 7
81.	A Data-Driven Approach For The Process Monitoring And Early Fault Detecion Of The Reactor-Regenerator In The RFCC Unit
82.	Software Development Of Lumped Kinetic Model For Heavy Oil Fluid Catalytic Cracking
83.	Study On The 12-lump Kinetic Model For Residual Fluid Catalytic Cracking
84.	Energy Optimization Of A Fluid Catalytic Cracking Unit In Dalian
85.	Optimization Of Steady State For Reactor And Regenerator System In FCCU
86.	Modeling Optimization Of Fluid Catalytic Cracking Reactor-regenerator System Based On Special Pseudo-components
87.	Study On The Effect Of Basic Nitrogen Compounds On Coking Reactions In Fluid Catalytic Cracking
88.	The Properties And Applications Of Liaohe Heavy Deasphalted Oil
89.	Operation Optimization And Energy Analysis Of 140�10~4 T/a Fluid Catalytic Cracking Unit
90.	Simulation Experiment And Numerical Research On Deposition And Scaling On Blade Surface Inside Flue Gas Used For Fluid Catalytic Cracking Unit
91.	Synthesis And Catalytic Application Of Modified Mesoporous Alumina Sol
92.	Effective Separation Of C4 Olefins For Maximizing Propylene Fluid Catalytic Cracking
93.	Investigation Of The Reutilization Of Waste Gas Generated During The Production Of Fcc Catalyst
94.	The Design And Characterization Of Si-modified Alumina As The FCC Matrix
95.	Study On The 12-lumped Kinetic Model For Residual Fluid Catalytic Cracking On Advanced Catalytic Cracking Equipment
96.	Deep Filtration Of Fluid Catalytic Cracking Oil Slurry
97.	Study On The 13-lump Kinetic Model For Residue Fluid Catalytic Cracking
98.	A 12-lump Kinetic Model For Residue Fluid Catalytic Cracking
99.	Recovery And Reclamation Of Spent Fluid Catalytic Cracking Catalyst
100.	The Deactivation Mechanism Of FCC Catalyst By Vanadium And Nickel Contamination
<<First <Prev Next> Last>> Jump to