Forming processes - Globe Thesis

Keyword [Forming processes] Result: 1 - 20 \| Page: 1 of 4
1.	Research On Automatic Hexahedral Mesh Generation Algorithm And FEM Numerical Simulation Technologies In Three-Dimensional Metal Forming Processes
2.	The Research On Inverse Problems In Sheet Metal Forming Processes Based On Neural Network
3.	Research On Key Technologies Of Intelligent Design In Sheet Metal Forming Processes
4.	Research On Element Free Galerkin Method And Key Simulation Techniques For Three-Dimensional Bulk Metal Forming Processes
5.	Study On Meso-Damage Model And Ductile Fracture Criterion In Metal Forming Processes
6.	Research On Numerical Simulations Of Metal Forming Processes By The Adaptive Element-free Galerkin-Finite Element Coupling Method
7.	Study On The Numerical Simulation Of Bulk Forming Processes By Reproducing Kernel Particle Method
8.	A Study On Automatic STL Mesh Drawback Repair Of The Finite Element Simulation Of Sheet Metal Forming Processes
9.	The Experiment And Study On The Technology Of Physical Modeling Of Plastic Metal Forming Processes Using Chromatic Clay As Model Material
10.	Research On High Cycle Fatigue Properties Of Magnesium Alloys With Different Forming Processes
11.	The Study On Cage Roll Forming Processes Of Large-sized ERW Straight Welded-pipe
12.	Microstructures And Performances Of Mg Products Made By Various Forming Processes And Related Issues During Processing
13.	A Study On Forming Processes Of Conical Cups With TA2M Titanium Alloy Sheets
14.	Simulation And Technological Analysis Of Die Forming Processes About 50AT Ending Part Of Touque Rail
15.	Spur Gear Precise Plastic Forming Processes Research
16.	The Investigation Of Different Kinds Of Forming Processes On The Microstructure And Property Of Copper Strip
17.	Research On The Carbon Emissions Model Of Typical Bulk Forming Processes
18.	Resistance Heating Forming Processes And Equipments Of 5A90 Al-Li Alloy Stringers
19.	The Deformation And Failure Of Coated Sheet Metal In Forming Processes
20.	Research On The Forming Processes And Propertiesin Selective Laser Melting Of Medical Alloy Powders
<<First <Prev Next> Last>> Jump to