Font Size: a A A
Keyword [Heat]
Result: 1 - 20 | Page: 1 of 10
1. Study Of Pool Nucleate Boiling Heat Transfer With Concept Of "Interfacial Vaporization Heat Sink
2. The Study On Immune Milk And Its Anti-Inflammatory Factor
3. Effects Of Cyclic Heat Treatment On Microstructures And Mechanical Properties Of TiAl-based Alloy
4. Study On The Production Of Heat-resistant Aluminum Alloy Pipe Blanks With Large Dimensions By Multi-layer Spray Deposition
5. Study On The Process,Devices And Principle Of Multi-Layer Spray Co-Deposition Technology For The Preparation Of Large-Sized SiC Particulate-Reinforced Aluminum Alloy Composites
6. The Heat Transfer Mechanism Of Material [Liquid-Solid] Rheologic Shaped Interface And The Extablishment Of Shaped Interface Based On The High Grad Of Change Of Temperature
7. The Difficult Problem And Its Countermeasures Of High Efficiency Grinding
8. Effect Of Alloying, Heat Treatment And Magnetization Treatment On Microstructure And Electrochemical Properties Of AB5 Type Hydrogen Storage Electrode Alloy
9. Study On Fabrication And Performance Of TiB2-BN Multiphase Ceramics
10. Research On Photoregeneration Of Activated Carbon And Synergy Effect Of TiO2--Activated Carbon
11. Studies On Theoretical Principle And Application Of Separation Of Zn-Pb
12. Thermophysical Properties And Rapid Solidification Of Undercooled Metallic Melts
13. Reservoir Fluid-solid-heat Coupling Model Research And Preliminary Application
14. The Preparation Of Glass-Ceramic Protective Coating And The Applying In Ti Alloy Heat Treatment Process
15. Mechanism Of Heat Treatment In Changing Polyamines And Reducing Chilling Injury Of Postharvest Cucumber
16. Theoretical Analysis And Experimental Study On Combined Convective And Infrared Radiation Drying
17. Research On Microwave-promoted Halogen-exchange Reaction
18. Quantum Chemical Studies On The Structures And Properties Of Organic Caged Energetic Compounds Including Polynitrocubanes
19. Study On Experimental And Numerical Simulation Of Coal Self-ignition Process
20. Study On The Mechanism Of Pulp Molding And Process Control
  <<First  <Prev  Next>  Last>>  Jump to