Heat loss - Globe Thesis

Keyword [Heat loss] Result: 21 - 40 \| Page: 2 of 3
21.	The Influence Of Plate Structure On Mass Transfer Efficiency For Cross-Type Valve Tray
22.	Note Hot Well Ground And Wellbore Flow Dynamic Simulation And Analysis
23.	Study Of The Pinch Design Method For Heat Exchanger Networks Based On The Oil Physical Properties
24.	Stuy On The Characteristic Of Fluid Flow And Thermal Recovery Method Of High Pour Point Oil Reservoir
25.	To Improve The Thermal Efficiency Of Steam Injection System Research And Application Of GC Block
26.	The Stress Analysis And Thermal Loss Research For An Intubation Closed Injection-production Integration String Used In Thermal Recovery Wells
27.	Study Of Antioxidant Activity And The Heat Loss Rules Of ?-Tocopherol In Oil And Multispectroscopic Studies On The Interaction Of ?-Tocopherol With Protein
28.	Calculation And Software Implementation Of Heat Loss Through A Cement Rotary Kiln Based On Infrared Image
29.	Performance Simulation Of Gas-engine Driven Heat Pump Water Heater And Application Research Of Combined Photovoltaic
30.	Study On Steam Flow And Heat Transfer In Horizontal Wells
31.	Study On Heat Loss And Influence Factors Of Cold Protective Clothing Containing PCMs
32.	Dynamic Simulation Of Thermal Coupling And Production Optimization Of Steam Stimulated Horizontal Wells In Chunguang Oil Field
33.	Investigation On The Mechanism Of Flame Acceleration And Deflagration To Detonation Transition Of Combustible Gases
34.	Preparation And Mechanism Of High Performance PVC Based On Multilayer Coextrusion
35.	Study On Thermal Protection And Comprehensive Evaluation Of Comfort Of Multi-layer Fabrics For Firefighter-Clothing
36.	Research On Integration Technology Of Injection And Production For Super Heavy Oil Reservoir In Cheng 91 Block
37.	Study On Calorific Value Loss And Temperature Rise Of Indonesian Coal Oxidation At Low Temperature
38.	Experimental Study On Solar Temperature-Controlled Dry/Wet Anaerobic Fermentation Process
39.	Modeling Of Temperature Distribution At Cutting Area In Cryogenic Machining
40.	Investigation of heat loss and feasibility of reheating in large radial-axial ring rolling processes
<<First <Prev Next> Last>> Jump to