Font Size: a A A
Keyword [High Speed Cutting]
Result: 181 - 200 | Page: 10 of 10
181. Research On Machining Mechanism And Surface Formation Characteristics Of Plastic Domain Based On SiCp/Al Composite
182. Optimization Of Milling Process Parameters For Aviation Carbon Fiber Reinforced Ploymer Resin Matrix Composites
183. Microstructure And Phase Transformation Mechanism Of The Surface Layer Of Titanium Alloy In High Speed Cutting
184. Influence Analysis Of Cutting Parameters On The J-C Constitutive Coefficients Of IN718 Alloy And Research On Its Optimization
185. Research On Deep Cryogenic Treatment And Cutting Performance Of WC-10Co Based Nanocrystalline Gradient Cemented Carbide
186. Study On Viscosity Effect Of Cutting Duplex Stainless Steel S32760
187. Study On TiAlN-based Composite Nano-coating Tool For High-speed Cutting Titanium Alloys Prepared By Magnetron Sputtering
188. Research On High Speed Brittle Cutting Properties And Tool Optimization Of Pure Iron
189. Research On The Mechanism And Mechanical Properties Of Surface Residual Stress In High-speed Cutting Nickel-based Superalloy
190. Vit1 Metallic Glass High-Speed Cutting Simulation And Experimental Research
191. Study On High-speed Cutting Of P20 Hardened Steel Under Cryogenic Liquid Nitrogen Cooling
192. Research On The Influence Of TC4 Machining Parameters On Fatigue Life
193. Properties Of White Layer On High Speed Cutting Surface Of Alloy Steel
194. Research On Optimization Of 2A12 Aluminum Alloy High-speed Milling Parameters Based On Neural Network And Genetic Algorithm
195. Research And Development Of High Speed Machining Experiment Table
196. The Milling Chip Forming Mechanism And Surface Integrity Studies Of Nickel-based Single Crystal Superalloy DD5
197. Experimental Study On Serrated Chip And Cutting Force In High Speed Cutting Of Ti6Al4V
198. Study On Dynamic Plastic Constitutive Relationship Suitable For High Speed Cutting Process
199. Preparation Of Nanocrystalline Gradient Cemented Carbide Tools And Research On Its Cutting Performance
200. Preparation And Application Of Al2O3-based Composite Ceramic Cutting Tools Machinability Study
  <<First  <Prev  Next>  Last>>  Jump to