Font Size: a A A
Keyword [High energy ball milling]
Result: 161 - 180 | Page: 9 of 10
161. Study On The Superplasticity Of Powder Metallurgy Equiaxed Duplex ?-TiAl-based Alloy
162. Study On Mechanical Properties Of TiAl-based Alloy At High Temperature
163. Study On The Tribological Property Of Graphene Lubricative Additive In Low-sulfur Fuel Oil
164. The Preparation Research Of Bi2Te3 And NaGaSn2 Thermoelectric Materials By High Energy Ball Milling And Spark Plasma Sintering(HEBM+SPS)
165. Low-temperature Sintering And Performance Control Of Low Dielectric Constant Microwave Dielectric Ceramics
166. Research On Electromagnetic Parameters Modulation Of Carbonyl Iron Absorbents And Bandwidth Extention Of Metamaterial Absorbers By In-plain Design
167. Study On Preparation And Hydrogen Sorption Mechanisms Of NaBH4-based Reversible Hydrogen Storage Composite Materials
168. Investigation Of Microstructure And Mechanical Properties Of Al-7Si-0.3Mg Alloy Fabricated By Thermomechanical Consolidation
169. Preparation Of Transparent Organic-inorganic Composites And Research On Their Optical Properties
170. Development Of Nano TiC/Ti Grain Refiner And Its Effect On Microstructure And Mechanical Properties Of Al-Cu-Mg Alloy
171. Fabrication,Processing And Mechanical Behavior Of CNT/7055Al Composites
172. Regeneration Of Sodium Borohydride By Hydrated Sodium Metaborate In Presence Of Magnesium Base Alloy
173. Preparation And Doping Modification Research Of PLZT Ceramics
174. Low-temperature Synthesis Of Si3N4 Powder Via High-energy Ball Milling Combined With Molten Salt Nitridation
175. Study On Preparation And Properties Of The Polycrystalline Cubic Boron Nitride
176. Effect Of Anisotropic Ball Milling Media On Electromagnetic Properties Of Microwave Absorbing Materials
177. Controllable Preparation And Performance Characterization Of Silicon Nanoparticles By Using Of Spark Erosion And High-energy Ball Milling
178. Research On Lithium Storage Properties Of Nanometer Silicon Particles Prepared By Pulse Discharge And High-energy Ball Milling
179. Preparation Of Amorphous Zero Valent Iron For The Degradation Of P-chlorophenol
180. Synthesis Of Sn-P/C Anode Composite And Sodium Storage Propeties
  <<First  <Prev  Next>  Last>>  Jump to