Hot-tearing - Globe Thesis

Keyword [Hot-tearing] Result: 1 - 20 \| Page: 1 of 4
1.	Effects Of Partialremelting Treatmentand Yttrium On Microstructureand Properties Of Zl205A Alloy
2.	Investigations On Hot Tearing Susceptibility And Mechanism Of Mg-Zn-(Al) Alloys
3.	Study On Hot-Tearing Of Low-Pressure Die Casting Magnesium Alloy Wheel And The Effects Of Sr
4.	Study On The Fluidity And Hot Tearing Behavior Of Mg-Gd-Y-Zr Alloys
5.	Study On High Strength Al-cu Alloy's Rare Earth Modification Techniques And Their Influences On Alloy's Micro/macro-structure And Properties
6.	Ultrasound Of .7050 Aluminum Alloy Ingot Casting Microstructure And Hot Cracking Susceptibility
7.	The Eutectic Cells Refinement Of Al-10Si-2Cu Alloy And Its Impact On Hot Tears Susceptibility
8.	Effect Of Mechanical Vibration On The Hot Tearing Of ZL205A Alloy Castings By Low Pressure Casting Process
9.	Research On Solidification Contraction Of Mg-Zn Based Magnesium Alloys
10.	Numerical Simulation For Casting Process Of The Bolster Of Freight Car Bogie
11.	Numerical Simulation Of Thermal Stress And Prediction Of Hot Tearing In A356 Alloy Castings
12.	The Research Of Fluidity And Hot Tearing For Cast NZ30K Mg Alloy
13.	Study On The Cracking Defects During Direct-chill Casting Of 7××× Series Aluminum Alloys
14.	Investigation On Solidification Process Of Aluminum Alloys And Casting Technologies Of Complicated Structural Components
15.	A Study Of Hot Tearing In Typical Mg-Al Magnesium Alloys
16.	Study On The Hot Tearing Susceptibility Of Various Heat-Resistant Magnesium Alloys
17.	Investigation On Hot Tearing Behaviors Of Mg-(Zn)-Ca Magnesium Alloys
18.	Investigations On Testing Methods And Hot Tearing Susceptibility Of Mg-Zn-Y Alloys
19.	Study On Hot Tearing Formation In Hypoeutectic Al-Si Alloys
20.	Investigations On Hot Tearing Susceptibility Of Two Magnesium Alloys
<<First <Prev Next> Last>> Jump to