Font Size:
a
A
A
Keyword [Hypereutectic]
Result: 181 - 200 | Page: 10 of 10
181.
Research On Complex Modification On Hypereutectic Al-Si Alloy By Novel AlP-Al
2
O
3
Master Alloy
182.
Study On The Die Soldering Of Hypereutectic Aluminum Alloys Used In High Pressure Die Casting
183.
Microstructures And Mechanical Properties Of Directionally Solidified NiAl-V Alloy Under High Temperature Gradient
184.
Effect Of Cu On Microstructure And Hydrogen Storage Properties Of Hypereutectic Mg-Ni Alloy And Its Kinetic Analysis
185.
In-situ Al
2
O
3
Induced Refinement And Modification Of Primary Si Particles In Hypereutectic Al-Si Alloy
186.
Study On The Modification Process And Direct Chill Casting Of Hypereutectic Al-Mg
2
Si In-situ Composite
187.
Grain Refinement Of Primary Si In Hypereutectic Al-Si Alloys Using P-based Master Alloys
188.
Preparation Of Al-P Alloy By Dissolving Aluminum Phosphide Tablets Into High-temperature Aluminum Liquid And Formation Process Of AlP
189.
Research On Microstructure And Properties Of Semi-solid Rheological Squeeze Casting TiB
2
/Al-20Si Composite
190.
Influence of magnesium content on the mechanical properties of cast hypereutectic aluminum-silicon alloys
191.
Analysis of second-phase particle fracture in hypereutectic aluminum-silicon alloys
192.
Methods to improve density and mechanical properties of a commercial hypereutectic aluminum-silicon powder metallurgy alloy
193.
A study of fluidity, flow stoppage and silicon modification in lost foam casting of hypereutectic aluminum-silicon alloys
194.
Rheological characteristics of hypereutectic aluminum-silicon (A390) in the semi-solid state
195.
Rheological behavior and microstructural evolution of semi-solid hypereutectic aluminum-silicon-magnesium-copper alloys using rheoforming process
196.
Effect of primary silicon crystals on the fluidity of hypereutectic aluminum silicon alloys in lost foam casting
197.
Microstructure control and investigation of nucleation and growth mechanism of silicon crystal grown from the hypereutectic aluminum-silicon melt
198.
Study On Modification Mechanism Of (Cr,Fe)
7
C
3
Carbides In Hypereutectic High Chromium Cast Iron Under The Electric Current Pulse Treatment
199.
Semi-solid Processing Behavior Of Hypereutectic Al-Si-Fe Alloy
200.
Microstructure Evolution And Property Control Of Hypereutectic Al-Si Alloy Prepared By A Composite Process Of Serpentine Pouring Channel And Chemical Modifier
<<First
<Prev
Next>
Last>>
Jump to
