Font Size:
a
A
A
Keyword [Inserts]
Result: 1 - 20 | Page: 1 of 5
1.
The Fabrication Of High-performance LIGA Mold Inserts For MEMS And Study Of The Demolding Properties
2.
Research On Chip-Breaking Capability And Machining Chip-Breaking Predictive System With 3-D Complicated Grooved Inserts In Turning
3.
Research On Designing Of Turning Inserts With Three-dimension Complex Groove Based On Cellular Automata And Its Chip Breaking
4.
Experimental Investigation Of Heat Transfer Capability Of Falling Film Evaporation In The Vertical Tube With Spring Inserts
5.
Numerical Simulation Of Cutting Forces Generated By Drills With Indexable Inserts And Optimization For Drill Parameters
6.
Research And Design Of Indexable Inserts 3-Dimensional Chip-Breaking Grooves
7.
Numerical Simulation Of Drilling Mechanism Under Non-steady Cutting Conditions For Dills With Indexable Inserts
8.
High Feedrate Cutting Performance With Wiper Turning Tools
9.
Research On Working Characteristic And Heat Transfer Enhancement With Polyacrylic Twisted-Tape Inserts In Horizonal Heat Exchanger
10.
Study On The Chip-breaking Mechanism Of Turning Inserts With 3-D Complex Groove At High Speed Cutting
11.
Research Of Groove Design And Fracture Mechanism Of Indexable Inserts
12.
Research Of Wear Mechanism And Chip-breaking Performance Of Indexable Inserts
13.
Research On Key Technology Of Plastic-metal Hybrid Injection Processing
14.
ANSYS Simulation Of The Drill With Indexable Inserts Based On FEM
15.
FEM Simulation Of The Drill With Indexable Inserts Based On DEFORM
16.
Preparation And Applied Basic Research Of CVD Diamond Coated Cemented Carbide Cutting Tools With High Cobalt Content
17.
Numerical Studies Of Heat Transfer Enhancement Technology By Tube Inserts
18.
Study On The Compact Density And Sintering Deformation Of Carbide Inserts
19.
Study Of Composite On Wire Thread Inserts-joint Srength
20.
Model And Algorithm Design On Rescheduling Of Steelmaking And Continuous Casting
<<First
<Prev
Next>
Last>>
Jump to
