Interrupted - Globe Thesis

Keyword [Interrupted] Result: 1 - 20 \| Page: 1 of 2
1.	Study On The Theory And Application Technology Of Cut-In Disrepair With 3D Complex Groove Milling Insert
2.	Study On The Microstructure And Properties Of Al-Cu-Mg Heat-resistant Aluminum Alloy Containing Ag
3.	Study On The Process Of Surface High Speed Steel Power Hacksaw Blade By Carborizing And Heat Treatment After Double Glow Plasma Surface Alloying Technique
4.	Study On Mixing Properties Of Rotating Mixer In RIM
5.	Study On The Chamfer Parameter Of PCBN Cutting Tool In Interrupted Cutting
6.	Research On The Performance Of PCBN Tools In Interrupted Cutting
7.	Effects Of Interrupted Ageing On Microstructures,Mechanical Properties And Impact Resistance Of Aluminum Alloy2519A
8.	Investigation Of Quench Sensivity And Microstructure Of6082and6061Aluminum Alloys
9.	Propellant Plasma Ignition Combustion To Suspend The Pilot Study
10.	Spatial Forming Model Of High-speed Dry Hobbing By Interrupted Cutting With Multiple-cutting-edge And Its Application
11.	Laboratory Development Of1500MPa Grade Super-strength Low Alloy Steel
12.	In Tio < Sub > 2 < / Sub > Surface Intermittent Pulse Deposition Cu < Sub > 2 < / Sub > O Particles And Photoelectrochemical Properties
13.	Al - Containing Ag Cu - Mg Alloy Hot Compression Rheological Behavior And The Study Of Aging Characteristics
14.	Study On Surface Roughness Experiment In The Interrupted Turning Of Hardened Tool Steel Cr12MoV With PCBN Cutting Tools
15.	Research On The Cutting Parameters Of PCBN Tools In Interrupted Cutting Hardened Steel
16.	Effects Of Solution Process And Interrupted Aging On Microstructures And Mechanical Properties Of 7150 Aluminum Alloy
17.	Study On Cutting Stability Of Gear Shaping And Its Application
18.	Synthesis Of Multisubstituted Triazoles With Interrupted Click Reaction
19.	Research On Residual Stress Relief Countermeasures In Al-Zn-Mg-Cu Alloy Thick Plates
20.	Study On Dynamic Constitutive Equation And Fracture Of QP980 Steel Coupling With Phase Transformation
<<First <Prev Next> Last>> Jump to