Johnson-Cook model - Globe Thesis

Keyword [Johnson-Cook model] Result: 1 - 20 \| Page: 1 of 2
1.	Research On Dynamic Properties Of Metal Matrix Composites SiCp/2024Al Reinforced With High Particle Volume Fractrion
2.	Experimental Investigation Into The Constitutive Relationship Of 2A12 Aluminum Alloy
3.	Dynamic Mechanical Properties Of Lead Free Solders
4.	Study On Mechanical Properties And Microstructure Of 6061 Aluminum Alloy During Hot Deformation And Aging
5.	Study On Dynamic Mechanical Properties Of Low Silver Lead-Free Solder
6.	Establish Of Constitutive Model And Research On Machinability Of4Cr13
7.	Fracture Prediction Of 5A06 Aluminum Alloy Sheet In Different Stress States
8.	Research On The Constitutive Model Parameters Identification Of304Stainless Steel
9.	Research And Application Of Merchant Cutting Model Based On The Unequal Division Shear Zone
10.	Research On The Micromilling Processes
11.	The Research On Development And Application Performance Of Ti-bearing Microalloyed Hot-rolled Enamel Steel And Magnetic Yoke Steel
12.	Research Of Preparation And Constitutive Behavior Of Bimodal Nanocrystalline Cu-Ag Materials
13.	Study On Dynamic Mechanical Properties Of Titanium Alloy Dynamic Thermal Oxidation
14.	Study On Plastic Behavior Of GH4169 Cutting Zone In High Speed Cutting
15.	Dynamic Constitutive And Damage Parameters Of 30CrMnSiNi2A Steel With Different Hardness
16.	Study On The Influence Of The Strain Rate On The Stress And Strain Concentration Of The Metal Orifice Plate
17.	Numerical Simulation Characteristics Of Stellite 6 Particle Impact On Steel Substrate In Supersonic Laser Deposition Based On ABAQUS
18.	Dynamic Mechanical Behavior Of Aluminum Alloy Layered Composites
19.	Finite Element Simulation Analysis Of Plastic Deformation And Shear Fracture Process Of Electrical Steel
20.	Dynamic Constitutive And Damage Parameters Of Ultra-high Strength Steel G31 At Different Tempering Temperatures
<<First <Prev Next> Last>> Jump to