LS-DYNA - Globe Thesis - Globe Thesis

Keyword [LS-DYNA] Result: 41 - 60 \| Page: 3 of 10
41.	FEM Analysis Of Rolling Process Of Special Bar Steel During Continuous Rolling
42.	Analysis On Impact Strength Big Bore Double Telescopic
43.	Analysis On Impact Characteristic Of Shearer Picks
44.	Long Shaft Surface Machining Of Equipment Design And Research On Numerical Simulaion Of Rolling Processing
45.	The Impact Resistance And Finite Element Analysis Of Three-dimensional Orthogonal Woven Composites
46.	Study On Numerical Simulation Of Coal Blasting
47.	Characteristic Analysis Of Single CBN Grit Honing Based On Finite Element Method
48.	Finite Element Analysis Of Rotary Ultrasonic Machining Mechanism
49.	Numerical Analysis And Compensation Research Of Springback In Multipoint Forming For Metal Sheet
50.	Numerical Simulation Of Sandstone Crushing Process And Determination Of Blasting Parameters Under The Effect Of Loose Blasting
51.	Numerical Simulation Of At-Rail Correction
52.	The Study Of The Asymmetric Helical Bending Technology On The Aluminum Pipe
53.	Cross Wedge Rolling Molding Process Of Shaft Parts
54.	3D Dynamic Simulation Analysis Of Thin-Wall Parts Forming Process Based On ANSYS/LS-DYNA
55.	Research On The Mathematical Model Of The Crepes Machine Roller Lateral Compressive Force Based On The Finite Element Analysis
56.	Analysis Of Impact Factors Of Mining Chain On Stuck State
57.	Study On Air Separation Charge Structure Of Open - Pit Mines
58.	The Simulation And Analysis Of Breaking Rock For TBM Disc Cutter
59.	Research On Matching Motion Parameters In Cutting Process Of Durm
60.	Investigation Of Surface Damage Behavior In Deep Drawing Of Galvanized Steel
<<First <Prev Next> Last>> Jump to