Laser additive manufacturing - Globe Thesis

Keyword [Laser additive manufacturing] Result: 21 - 40 \| Page: 2 of 8
21.	Research On Composition Monitoring During Laser Additive Manufacturing Titanium Alloy Process
22.	Experimental Study Of Process Parameters Setting In Laser Additive Manufacturing For The Repair Of Inconel 718 Turbofan
23.	Recursive Subspace Identification Based Adaptive Predictive Control Design For Melt Pool Temperature During Laser Additive Manufacturing
24.	Recursive Subspace Identification Based Adaptive Predictive Control Design For Melt Pool Temperature During Laser Additive Manufacturing
25.	Studies On Formation Mechanism And Control Methods Of Cracking In Laser Additive Manufactured Inconel 718 Alloy
26.	Optimal Design And Modeling Of Variable-Density Cellular Structures For Laser Additive Manufacturing
27.	Mechanism Of Dendrite Growth For Laser Additive Manufacturing Of Nickel-base Superalloy
28.	Microstructure And Mechanical Property Of LEN98M Superalloy Fabricated By Laser Additive Manufacturing Technology
29.	Numerical Simulation Study On The Temperature Field Of Ni-Base Superalloy Prepared By Laser Additive Manufacturing
30.	Study On Microstructure And Mechanical Properties Of Laser Additive Manufactured And Heat Treated CoCrW Alloy
31.	Study On The Molten-pool Geometry And Solidification Parameters Of Laser Additive Manufactured Inconel 718
32.	Research On Sound Eliminating Performances And Energy Absorption Properties Of Porous Aluminum Alloys By Laser Additive Manufacturing
33.	Study On The Forming Technology,Microstructure And Properties Of Porous Magnesium Alloys Produced By Laser Additive Manufacturing
34.	Study On The Process Of Gradient Microstructure In A Nickel-based Alloy By Laser Additive Manufacturing
35.	Study On The Additive Manufacture Technology Of Titanium Alloy Synchronous Feed Powder
36.	Process And Properties Of Micro-arc Oxidation On Titanium Alloy Prepared By Laser Additive Manufacturing
37.	Research On Forming Mechanism And Properties Of Gradient Interface Ni Based Composite Fabricated By Laser Additive Manufacturing
38.	Process And Performance Control Of Laser Additive Manufacturing Of Ni-based Composites Based On Thermal-Mechanical Coupled Method
39.	Microstructure And Properties Of Al-si-mg Alloys Formed By Laser Additive Manufacturing
40.	Microstructure And Properties Of Ti-Zr Alloys Fabricated By Laser Additive Manufacturing
<<First <Prev Next> Last>> Jump to