Limit - Globe Thesis - Globe Thesis

Keyword [Limit] Result: 1 - 20 \| Page: 1 of 10
1.	Study On Positive-negative Forming Theory Of Revolving Shell And Bulging Technology Of Aotomobile Axle Housings
2.	Studies On Radiological Dose Model And Measuring Method Of Undamaged Samples For Decorative Building Materials
3.	Failure Waves In Alumina Ceramics Subjected To Shock Compression
4.	Temporal Self-organization Externally Controlled By Electro-chemical Constraints In B-Z Reaction System
5.	Study On The Planning Model And Decision Support System Concentrating Profit-making
6.	Study On The Theory And Application Designing The Anchor Shoring Based On Reliability
7.	The Limit Confirming And Hydraulic/Thermodynamic Calculation Method Research For Oil-gas-water Mixing Transportation Safe In Pipeline During Oil Producing With Supper High Water Cut
8.	Research On New Technology And Theoretical Of Solid Granules Medium Forming
9.	Study On The Time-Dependent Law Of Thermophysics Parameters Of Combustion In Fullscale Tunnel Fire And Simulation Of It
10.	The Research On The Limit Parameters For One-Operation Forming The Conical Part In Deep Drawing
11.	Study On Prediction Technology For Residual Lifetime Of Corroded Gas Pipeline In Service
12.	Study Of Grain Refinement, Hot Deformation Behavior And Working Technology Of Mg-Al Alloys
13.	Research On The Superplasticity And Advanced Superplastic Forming Of Light Alloy
14.	Experimental And Theoretical Research On Underground Soft Rock Roadway Reinforced With Geocell
15.	Research On Forming Limits Of Sheet Metal Basing On Continuum Damage Mechanics
16.	Study On In-service Welding Of Pressurized Pipeline
17.	Study On The Heavy Disasters Dynamic Mechanism And Rescue Technology Message Support System In Mine
18.	Research On Hydroforming Of Profiled Cross-section Hollow Component
19.	Research On Stress-Relief Under Control And Creep Control Of Soft Rock Roadway In High Stress
20.	The Technology And Usable Conditions' Classification Of Aquifer-Protective Mining In Shallow Sand-Bedrock-Coal Seam
<<First <Prev Next> Last>> Jump to