Font Size: a A A
Keyword [Lining]
Result: 1 - 20 | Page: 1 of 10
1. A Research On Mathematical Models Of Flash Smelting System And On-line Simulative Monitoring Of Frozen Profile Of Reaction Shaft In Copper Flash Furnace
2. The Study Of Developing Mechanism And Harnessing Technology For Shaft Fracturing In Thick Alluvium
3. Study On Dynamic Properties Of Sizing Press Mill And Thermo-Mechanical Coupled Finite Element Simulation Of Slab Side Pressing
4. Research On Prolong The Life Of Large Pre-baked Aluminium Electrolysis Cell
5. The Study On Fire Performance Of Typical Thermoplastic Lining
6. Tribological Behavior And Modification Of Friction Lining For Mine Hoist Under Severe Conditions
7. Study On The Inhomogeneity Of Horizontal Lateral Pressure On Shaft Lining
8. Study On The Mechanical Properties And Design Theory For Radial Compressible Shaft Lining
9. Thermo-stress Coupling Behavior Of Lining During Sliding In Friction Hoist
10. Research On The Stress Status And Evolvement Rule Of Vertical Shaft-Lining In Deep Alluvium
11. Study On Recycling Of Low - Carbon Grade Waste Cathode By Flotation Method
12. Biaxial Weft Yarn Fabric Of The Shear Properties Of The Multi-layer Lining And Forming Computer Simulation
13. Ladle Lining With The Mgo Substrate And Al <sub> 2 </ Sub> O <sub> 3 </ Sub>-based Refractories For Steel Quality Impact Study
14. Study On The Loads And Design Theory Of The Monolayer Freezing Shaft Lining In Water-rich Bedrock
15. Study On The Key Technology In Large-scale Industrial Reformer For Natural Gas Non-Catalytic Partial Oxidation Process
16. Study On Key Construction Technologies Of The New Monolayer Freezing Shaft Lining In Deep Water-rich Bed Rock
17. Study Of Optimization Design And CAD System For The Lining Design Of The P-S Converter
18. Study On The Mechanical Characteristics Of Bored Shaft Lining Consisting Of Inner Steel Sheet And Reinforced Concrete In 600m Thick Alluvium
19. Dynamic Analysis On The Stabality Of The Freeze Shaft Lining In Thick Top Soil
20. Research Of The Influence Of Component,Microstructure And Impact Energy On The Impact Corrosion And Abrasion Mechanisms Of Steels Used In Wet-grinding Machine Lining Board
  <<First  <Prev  Next>  Last>>  Jump to