Low Pressure - Globe Thesis

Keyword [Low Pressure] Result: 1 - 20 \| Page: 1 of 10
1.	Numerical Simulation And Experiment On The Gas Solid Flow And Combustion Character In Circulating Fluidized Bed Combustion For Solid Medical Waste
2.	Study On The Diffusion And Reaction At The Interface Of Thermal Barrier Coatings On Superalloy Substrate
3.	Study On The Methods For Determination Of Metals Elements By Flow Injection Analysis And Low Pressure Ion Chromatography
4.	Study On Determination Of Anion By Single-column LPIC And Modeling Of Ion Chromatography Retention
5.	Influence Factors Simulation Study Of The Self-Exicited Oscillation Pulsed Jet Device And Nozzle Structure Optimized Design
6.	Simultaneous Isolation And Purification Of Huperzine A And B From Traditional Chinese Herb Huperzia Serrata By Integrated Low-Pressure Liquid Chromatography
7.	Microwave Assisted Catalytic Wet Air Oxidation For The Treatment Of Organic Wastewater With High Concentration Under Low Temperature And Low Pressure
8.	Aluminum Wheel Digital Simulation And Process Optimization
9.	Development And Application Of Lowpressure Backwashing Filter In Oilfield Wastewater Treatment
10.	Study On Technology Optimization And Quality Control Of Low-pressure Expendable Pattern Casting Process For Magnesium (Aluminum) Alloy
11.	Preparation And Study Of Thermal Barrier Coating Upon Titanium-Based Alloy
12.	Studies On Chemistry Of Some Well-defined Flow Systems
13.	Synthesis And Flame-Retardant Properties Of Water-Containing Inorganics/Thermosetting Resin Composites
14.	Study On Prepare Composite Coatings By Controlled Atmsphere Thermal Spraying
15.	Study On Technology Of The Expendable Pattern Shell Casting Process With Vacuum And Low Pressure For Aluminum (Magnesium) Alloy
16.	The Influence Of Tibetan Low Ambient Pressure On Fire Smoke Signals Law In Confined Ceiling Jet Zone And Fire Detection Algorithm Research
17.	Experimental And Kinetic Modeling Studies On Pyrolysis And Premixed Flames Of N-Hptane And Iso-Octane
18.	Inverse Calculation Of Interfacial Heat Transfer Coefficient During Casting Solidification And The LDPC Process Optimization For Thin-walled Casting Of Aluminum Alloy
19.	Diagnostics Of Plasma Jet And Coating Deposited By Very Low Pressure Plasma Spray
20.	Study On Heat Treatment For Low Pressure Rotors Of30Cr2Ni4Mov Steel
<<First <Prev Next> Last>> Jump to