Machined - Globe Thesis

Keyword [Machined] Result: 1 - 20 \| Page: 1 of 10
1.	Study On Residual Stresses And Distortion Theory Of Aeronautica Frame Structure In The Milling
2.	Machined Surface Quality For High-Speed Milling
3.	Research On Deformation Theory And Characteristics Of Machined Surface For High-speed Milling Aviation Aluminum Alloy
4.	Study On Erosion Mechanisms And Polishing Technology Of Hard-Brittle Materials Machined With Precision Abrasive Waterjet
5.	Study Of The Ultra-precision Online Measurement Based On Double-frequency Heterodyne Laser Interferometer System With Two Longitudinal Modes
6.	Research On Machined Technology And Machined Quality Of Endless Electroplated Diamond Wire Saw
7.	Research On Mechanism Of Super-Thin Precision Cutting And Machined Surface Quality
8.	Study On Mechanical Behavior In Hsc
9.	Residual Stress Control Research On Machined Surface For Pre-stress Cutting
10.	Investigations On Tool Wear And Machined Surface Propenies Based On Minimum Surface Wear Rate
11.	Theoretical And Experimental Studies On The Ultra-Precision Face-milling Of Engineering Ceramics
12.	Simulation And Experimental Study On Surface Profiles Machined By High-speed Milling
13.	Study About Outburst Mechnism And The Predicting Method For Full Machined Coal Face
14.	Numerical Simulation And Analysis For Machined Surface Topography In Milling Process And Form Error In Face Milling Process
15.	Research On The Effect Of Diamond Wheel Grinding Parameters On Ceramic Machined Surface Roughness
16.	Study On The Evaluation Method Of Machined Surface Roughness Of C/C Composite
17.	Study On Its Image Characteristic For Quantitative Evaluation Of Burn Surface Machined
18.	Research On Mechanical Properties Of KDP Crystal In Ultra-Precision Machined Surface
19.	Study On Topography Simulation Of High Speed NC Machined Surfaces
20.	Error Analysis And Cutter Location Control For Unequal Diameter Side Milling Of Cylindrical Cam
<<First <Prev Next> Last>> Jump to