Font Size: a A A
Keyword [Material removal]
Result: 161 - 180 | Page: 9 of 10
161. Study On EDM Process And The Removal Mechanism Of Titanium Alloy
162. Study On Prepration Of Alumina/Silica Composite Abrasive And Its CMP Performance
163. Research On The Interfacial Strength And Grinding Mechanism Of Material Removal For Ceramic Matrix Composites
164. Research On The Key Technologies Of Ultra Precision Polishing Of Silicon Carbide Single Crystal Substrate
165. Research On The Key Technology Of NC Grinding Process For Blisk Structural Components
166. Material Removal Mechanism And Experimental Research For Loose Abrasive Super-Smoothing Polishing
167. Research On Vibration Cutting Mechanism And Experiment Of SiC Monocrystal Cut By Diamond Wire-Saw Excited By Transverse Ultrasonic Wave
168. Research On Brittle Ductile Transition And Machining Quality In Ultrasonic Vibration Assisted Grinding Of BK7 Optical Glass
169. The Ultra-precision Numerical Control Polishing Method Based On Water Dissolution Principle For KDP Crystals
170. Research On Lapping Technology Under Swing-Type Plane Lapping Mode For Ceramic Balls
171. Study On Chemical Mechanical Polishing Of Hard And Brittle Crystal Substrates
172. A Study Of Material Removal Rate Of Sapphire Lapping By Fixed Abrasive Pad
173. Discharge Property And Experimental Studty On EDM Of Ni-Al2O3Functionally Graded Materials
174. The Study On Mechanism Of EDM-inducedablation Machining And Experimental Of Added Grinding Finishing
175. The Study Of Material Removal Modes In Brittle Materials By Micro USM
176. Study On Finite Element Simulation And Experiment Of WEDM In Gas
177. Study On High Efficiency Acoustic Assisted Shear Thickening Polishing Method
178. Study On Rotary Ultrasonic Face Milling Of Quartz Glass Based On Material Removal Mechanism
179. The Theoretical And Experimental Research On The Material Removal Of Constant Force Abrasive Belt Grinding And Polishing
180. Research On Virtual NC Turning Of Special Shaped Screw
  <<First  <Prev  Next>  Last>>  Jump to