Micro Channel - Globe Thesis

Keyword [Micro Channel] Result: 1 - 20 \| Page: 1 of 4
1.	Theoretical And Application Research On Minisize Impinging Stream Technology Under Ultra-high Pressure
2.	Research On Reaction Process Intensification Of Biodiesel Production
3.	Theoretical And Experimental Study On Methane Wet-air Autothermal Catalytic Reforming At Low Temperature In The Micro-channel
4.	Experimental Investigation On Bubble Formation In Microchannel T-junctions
5.	Investigations On The Fabrication Of Super-Hydrophobic Surface On Aluminum Micro-Tubes And Water Flow Characteristics In The Tubes
6.	Investigations On Water Flow And Heat Transfer In The Super-Hydrophobic Micro-Channel
7.	Numerical Simulation And Knowledge Discovery Of Micro-channel Flat-tube Rotary Bending In-plane
8.	Research And Structural Optimization Of Methanol Steam Reforming For Hydrogen Production With Non-uniform Distributed Micro-channel Carrier
9.	Experiment Research On The Influence Of Melt Viscosity On The Filling Flow In Micro-injection Molding
10.	Study On The Micro Thixoforming Process Of Semi-Solid A356 Alloy In Meso Scale
11.	Heat Management Of Methanol Steam Reforming Process In Micro-channel
12.	Lattice-Boltzmann Simulation On Fluid Dynamics And Mixing In Micro Channels
13.	Numerical And Experimental Study Of Transient Performance Of Methane Catalytic Auto-Thermal Reforming In Micro-channel
14.	CFD Simuiations And PIV Measurements On Hydrodynamic Behaviour Of Submerged Flat Membrane Bioreactor Equipped With Micro-channel Turbulence Promoter
15.	Lattice-boltzmann Simulation On Fluid Dynamics And Mixing In Micro Channels
16.	Fine Micro-structural Components Of The Injection Molding Process Fountain And Contraction Of The Flow Simulation And Application
17.	.2-T-type Micro-channel Visualization Of Bubble Generation And Crushing Characteristics Experimental Study
18.	Research Of CuO Selective Absorbing Coating And Apply To Solar Collector With A Micro-channel
19.	Study Of The Aqueous Preparation Processes And Properties Of Ⅱ-Ⅵ Group Quantum Dots
20.	The Analysis Of Complex Flowing Behavior Of Injection Molding Parts With Micro-features
<<First <Prev Next> Last>> Jump to