Micro-injection - Globe Thesis

Keyword [Micro-injection] Result: 61 - 80 \| Page: 4 of 5
61.	Comparison Of Structure And Properties Between Micro-injection Molded And Micro-injection Compression Molded Parts
62.	The Study Of Cosmetic Micro-injection Molding Polymer Micro-needle
63.	Research On The Acoustic And Temperature Field Distribution Of Polymer Ultrasonic Plasticizing Process
64.	Micro-injection Molding Mechanism And Process Technology For High Aspect Ratio Polymer Elements
65.	Micro-Injection Molding And Products Testing For Cosmetic Polymer Micro-Needle
66.	Optimization Design Of Micro-injection Spline Mold And Research On Cavity Pressure Monitoring Technology
67.	Formula Design And Charge Technology Of Small Critical Size Booster Based On Melt Casting
68.	Development Of Control System For Precision Micro Injection Molding Machine Based On PLC
69.	Research On Digital Micro - Injection Technology Based On Piezoelectric Ceramics And Its Application
70.	Study Of Injection Molding For PEEK Micro Gear
71.	The Research For Injection Molding And Hot-embossing Process Of Plastic Microreactor
72.	The Research Of Differential System And The Forming Process
73.	Design Of Injection Unit For Full-Electric Injection Molding Machine And Experimental Study On Plastic Product With Microstructure
74.	Flow Characteristics Of The Filling Process,Morphology And Nano-indentation Mechanical Properties Of Isotactic Polypropylene Micro Injection Molded Parts
75.	Simulation And Experiment On Crystallization And Orientation Of Isotactic Polypropylene Micro Injection Molded Parts
76.	Experimental And Simulation Study Of UV Curing Injection Molding For Microfluidic Chip
77.	Research On The Injection Molding Of Micro Plastic Components With High Aspect Ratio
78.	Research On Mechanical Behavior Of Solid Cosmetic Polymer Micro-needle Made By Micro Injection Molding And Hot Embossing Process
79.	Study On The Optimization And Design Of Ultrasonic Plasticizing-molding System For Micro-nano Devices
80.	Study On Products Quality Of Micro Injection Molding Based On Mold Cavity Pressure Measurement
<<First <Prev Next> Last>> Jump to