Microinjection - Globe Thesis

Keyword [Microinjection] Result: 1 - 20 \| Page: 1 of 2
1.	The Simulation Of The Micro-Part's Weld Lines By Injection Molding
2.	Research On Microinjection Moulding Based On Microfluidic Chip
3.	New Technology Research On The Application Of Nano Flocculant In Petrochemical Wastewater Disposal
4.	Numerical Simulation Of The Filling Stage Of Micro-injection Molding In Slit Cavity
5.	High Performance Liquid Chromatography Combined With Chemiluminescence Applied Research
6.	Micro Injection Molding Of Numerical Simulation Of The Filling Process
7.	Automated Cell Micro-injection Device Fabrication And Micro-injection Of Experimental Research
8.	Design,Adhesion And Robustness Of Hierarchically Microstructured Surfaces Prepared By Microinjection Compression Molding
9.	Analysis Of Morphology And Shrinkage Of IPP Micro Injection Molded Parts
10.	The Data Processing System Of Ultrasonic Plasticizing Rheometer
11.	Toxic Effects And Thyroid Disruption Of Bisphenol AF On Zebrafish Embryos And Larvae
12.	Study On The Formulation Design And Molding Technology Of Silicone Rubber Based Booster Explosive For Explosive Network
13.	Design And Wettting And Optical Trapping Properties Of Cicada Wing-inspired Nanostructured Surfaces Prepared By Microinjection Compression Molding
14.	Research On Mechanical Behavior Of Solid Cosmetic Polymer Micro-needle Made By Micro Injection Molding And Hot Embossing Process
15.	Microinjection Compression Molding And Light Trapping Properties Of Micro-/nanostructured Surfaces
16.	Research On The Technology And Mechanism Of Graphite Coating Assisted Microinjection Molding
17.	Design And Condensate Microdrop Self-Removal Performance Of Bionic Nanostructured Surfaces Prepared By Microinjection Compression Molding
18.	Design And Water Droplet Impacting Performance Of Superhydrophobic Micro-/nano-structured Surfaces Prepared By Microinjection Compression Molding
19.	Microneedle Study Of Transdermal Drug De-Livery Based On Micro-injection Compression Technology
20.	Rheology, properties and microstructure development of polymer/carbon nanotube composites in microinjection molding process
<<First <Prev Next> Last>> Jump to