Minimal quantity lubrication - Globe Thesis

Keyword [Minimal quantity lubrication] Result: 1 - 20 \| Page: 1 of 2
1.	Near-dry Deep Hole Processing System Construction And Key Technology Research
2.	Research On Tool Wear And Its Inhibition In Diamond Cutting Of Ferrous Metals
3.	The Detection And Analysis Of Ambient Air Quality In The Cutting Process Based On Minimal Quantity Lubrication
4.	Research On Cooling System Of Disc Cutter Based On Minimal Quantity Lubrication
5.	Study On Test Of The Coated Tool Cutting Stainless Under Cryogenic Minimal Quantity Lubrication
6.	Experimental Research On Intelligent Processing Technology Of Low-Temperature Cold Wind With Minimal Quantity Lubrication
7.	The Research On The Intergrated Equipment Of Charged Aerosol Lubrication And Its Milling Process
8.	Investigation On Tool Wear Properties Of Milling Inconel Overlays And Its Application
9.	Surface Formation Mechanism And Experimental Study Of Mixed Nanofluid Minimum Quantity Lubrication And Multi-angle Ultrasonic Vibration Coupling Grinding
10.	Experimental Study On Grinding Process Of Electrostatic Minimal Quantity Lubricantion
11.	Research On Surface Integrity Of Micro-textured Tool Turning Titanium Alloy Under Minimal Quantity Lubrication Condition
12.	Study On Process Optimization For Minimal Quantity Lubrication Machining
13.	Basic Theory And Experimental Study On Grinding Of Titanium Alloy Abrasive Belt With Minimal Quantity Lubrication
14.	Study On Friction And Cooling Characteristics Of Nanofluid Minimum Quantity Lubrication Milling GH4169 Superalloy
15.	Process Study On Minimal Quantity Lubrication Based On Diamond Wire Saw
16.	Research On Application Of Green Nano-Cutting Fluid Under Minimal Quantity Lubrication Technology
17.	Study On Milling Machinability And Process Optimization Of GH4169 Nickel-based Superalloy Under Minimal Quantity Lubrication Condition
18.	Study On Adsorption Properties And Ambient Air Quality Of Electrostatic Minimal Quantity Lubrication
19.	Spray Flow Field Characteristics Of Electrostatic Minimal Quantity Lubrication And Its Influence On Lubrication Performance
20.	Heat Transfer Characteristics Of Electrostatic Minimal Quantity Lubrication And Its Influence On Cutting Temperature
<<First <Prev Next> Last>> Jump to