Molding parts - Globe Thesis

Keyword [Molding parts] Result: 1 - 19 \| Page: 1 of 1
1.	Research On The Calculating Methods Of The Working Dimensions For The Injection Molding Parts
2.	Automatic Generation Technology Research Of Molding Parts Based On Feature And CBR
3.	Study On Forming Mechanism And Eliminating Methods Of Weld Line On Injection Molding Parts
4.	Study On The Key Techniques Of Gas-Assisted Injection Molding In Automobile Injection Molding Parts
5.	The Causes And Prediction Of Quality Defects For The Micro Injection Molding Parts
6.	Study On Forming Property Of Complex Texturing Of Laser And Surface Quality Of Workpiece
7.	Mold Capp Process Management And Process Data Generation Method
8.	The Analysis Of Complex Flowing Behavior Of Injection Molding Parts With Micro-features
9.	Research On Surface Quality Improvement Of Microcellular Foam Injection Molding Parts
10.	Moldflow Analysis On Big-sized Injection Molding Parts Of Composite Materials And Their Optimization Of Process Parameters
11.	Large Scale Extrusion Compression Joint Molding Equipment Research And Manufacture
12.	Application Of The Machine Vision Technology On Appearance Detection-the Case Of Injection Molding Parts (Disc) And Battery
13.	Research And Development Of Common Appearance Defects Detection System For Injection Molding Parts
14.	Process Simulation And Structure Optimization Of Injection Molding Parts With Short Glass Fiber Reinforced Thin Wall
15.	Study On Performance Prediction And Acoustic Signal Of Laser Selective Melting Molding Parts
16.	Research And Implementation Of Appearance Defects Small Sample Vision Detection Method For Injection Molding Parts
17.	Effects of tooling surface roughness when injection molding parts with micro and nanostructured surfaces
18.	Research On Mechanical Properties Of PEEK Molding Parts Based On FDM
19.	Research On Visual Inspection Method Of Appearance Defects In Injection Parts Sorting System
<<First <Prev Next> Last>> Jump to