Ni based alloy - Globe Thesis

Keyword [Ni based alloy] Result: 121 - 140 \| Page: 7 of 8
121.	Microstructure Evolution And Thermal Stability Of Ni-Based Alloy By Surface Mechanical Rolling Treatment
122.	Microstructure And Fatigue Properties Of Ni-Based Coatings Prepared By Plasma Cladding On Gray Cast Iron
123.	Preparation And Electrochemical Properties Study Of Nickel-based Alloy Aerogels
124.	Study On The Microstructure And Magnetic Properties Of Fe-Ni Based Alloy Film Electrodeposited In Magnetic Field
125.	Preparation And Properties Of Vacuum Cladding Ni+WC+GO Composite Cladding Layer On Cast Steel Surface
126.	Preparation Of Nickel-based Transition Metal Electrode And Its Hydrogen-evolution Performance Of Electrolytic Of Water
127.	Study On Preparation Process And High Temperature Oxidation Behavior Of Ni Based Alloy Coating By Laser Cladding
128.	Research On The Process And Quality Control Of Deep Drawing Spinning Of Conical-cylindrical Part Of Ni-based Alloy
129.	Study On The Smelting And Homogenizing Technology Of High Quality N08028 Alloy
130.	Design Of Electrode Structure And Its Application In Gas-involving Electrochemical Reactions
131.	Study On Vacuum Infiltration Casting Technique And Tribological Properties Of Ni-based Surface Infiltrated Layer On Cast Steel Substrate
132.	Research Of Ni60-based Diamond Composite Coating Produced By Supersonic Laser Deposition
133.	Molecular Dynamic Simulation Of Radiation Resistance Of Nickel-based Alloys
134.	Study On Microstructure And Properties Of Laser Cladding Ni-based Alloy Coatings Under The Alternating Current And Steady Magnetic Field
135.	Mesoscopic Thermodynamic Behavior And Processing Control Of Selective Laser Melting Ni-based Alloy Powder
136.	Study On Intergranular Corrosion Properties Of X65-inconel 625 Metallurgical Clad Pipe Welded Joints
137.	Study On Laser Cladding Technology Of WC Reinforced Ni-based Alloy On 42CrMo Steel Surface
138.	Microstructure And Mechanical Properties Of Ti-Ni-Based Functionally Graded Materials Fabricated By Dual-Wire Arc Additive Manufacturing
139.	Effect Of Beam Energy Density Characteristics On M Icrostructure And Mechanical Properties Of Ni-based Alloy By Laser Additive Manufacturing
140.	Effects Of Rolling And Annealing On The Microstructure And Mechanical Properties Of A Ni-Cr-W Alloy
<<First <Prev Next> Last>> Jump to