Physical modeling - Globe Thesis

Keyword [Physical modeling] Result: 1 - 20 \| Page: 1 of 5
1.	3-D FEM Analysis Of Forming Laws In Precision Forging Process Of Blade
2.	Mathematical And Physical Modeling Of Multifunction RH Refining Process
3.	Mathematical Modeling Of Non-equilibrium Decarburization Process During The RH Refining Of Molten Steel
4.	Mathematical And Physical Modeling Of Fluid Flow Phenomena In An AOD Converter Bath With Side And Top Combined Blowing
5.	Identifying Method And Distribution Rule Of Remaining Oil After Polymer Flooding
6.	Mathematical And Physical Simulation On RH Vacuum Refining Process
7.	Study On The Control Of Continuous Casting Slab Quality Under Unsteady Casting Conditions
8.	Mathematical And Physical Modeling Of Supersonic Coherent Jet Behavior From Oxygen Lance For Converter Steelmaking
9.	Development Of Slot-bottom Powder Injection Device And Study On Characteristics Of Gas-Particle Flow In Bottom-Blowing Ladle
10.	Study On The Fluid Flow In A Multi-heat Teeming Tundish For Heavy Steel Ingot
11.	Study On Flow Control Device In Six-strand Tundish
12.	The Mathematical And Physical Modeling Of The Fluid Flow In The Six-strand Tundish
13.	Physical Modeling Method With Colorful Layer-built Plasticine Billet And The Use In The Cross Wedge Rolling Precision Preform Of Connecting Rod
14.	The Experiment And Study On The Technology Of Physical Modeling Of Plastic Metal Forming Processes Using Chromatic Clay As Model Material
15.	Study On Tundish Configuration Optimization In Bloom Continuous Casting
16.	Optimization Of Tundish Structure In Four-Strand Billet Continuous Caster By Physical Modeling
17.	Study On Optimization Of Flow Control Devices In Four-Strand T Type Tundish
18.	Physical Modeling Of Flow Field In Twelve Strand Tundish
19.	Physical Modeling And Simulation Of Numerical Control Milling Processing
20.	Milling Force Modeling, Simulation And Experimental Study Of High Speed Milling
<<First <Prev Next> Last>> Jump to