Physical modeling - Globe Thesis

Keyword [Physical modeling] Result: 21 - 40 \| Page: 2 of 5
21.	Study On Optimization Of Flow Control Devices In Eight-Strand Tundish
22.	The Simulation Experiment Study Of Foaming Profile Control In Steam Injection Production Of Heavy Oil Reservoir
23.	Improve Recovery Factor Of Ultra Heavy Oil By SAGD
24.	Reaserch Of SAGD Of Block Du84 Of Shu 1 Area
25.	Physical Modeling Experiment On Electrostatic Law And Electrostatic Safety Assessment Of Oil Storage Tank
26.	Optimization Of Flow Control Device And Gas Bubbling In Thin Slab Continuous Casting By Physical Modeling
27.	Physical Modeling Of Slag/Steel Interfacial Behavior In Slab Continuous Casting Mold With Argon Blowing
28.	Physical Modeling Of The Molten Steel Flow In A Slab Continuous Casting Mold With Argon Injection
29.	Study On Flow Field And Temperature Field In CSP Mold
30.	Experimental Research On Physical Modeling Of Flooding Oil In Block Xing13
31.	Refractory Erosion Study And Structure Optimization Of Six Flow Tundish
32.	Study On Optimization Of Two-Strand T-Type Tundish Configuration In Continuous Casting
33.	Optimization Of Seven-strand Continuous Casting Tundish Configuration Based On Gas Bubbling Curtain
34.	Physical Modeling Of Slag/steel Interfacial Behavior In Slab Continuous Casting Mold With Argon Blowing
35.	304 Stainless Steel Pull-physical Modeling And Numerical Simulation Of Deep Drawing
36.	The Removing And Controlling Of Fine Inclusions In TMBP
37.	Numerical And Physical Modeling Of Raceway Zone In Melter Gasifier Of COREX Process
38.	Improved GEP Based Physical Modeling And Process Parameters Optimization Methods For CNC Milling Process
39.	Generation And Controlling Of Slag Entrapment Caused By Vortex On Teeming Process In Ladle
40.	Physical Modeling And Infrared Detection Of Deformation And Failure For Roadway At Great Depth In Stratified Rocks
<<First <Prev Next> Last>> Jump to