Font Size:
a
A
A
Keyword [Physically-based]
Result: 1 - 20 | Page: 1 of 1
1.
Multiscale Simulations Of The Effect Of Helium And Dislocation On The Mechanical Properties Of HR-2 Alloy
2.
Dynamic Behavior Research Of FeCrNi Alloy
3.
Static Softening Of Al-Zn-Mg-Cu Alloy Following Thermal/Mechanical Processing: Physic Simulation And Modeling
4.
Study Of Strengthening And Toughening,and Physically Based Modelling Of Martensite-based High-strength Steels
5.
Elastoplastic Material Design And Simulation
6.
A Physically Based Ground-level PM
2.5
Estimation Using Remote Sensing Technology
7.
Research On The Physically Based Modeling And Assembly Simulation Of Multi-branch Cables
8.
Deformable Objects Modeling Based On Neural Network
9.
Development of physically based plastic flow rules for body-centered cubic metals with temperature and strain rate dependencies
10.
Physically-based simulation of ice formation
11.
Physically-based models for elevated temperature low cycle fatigue crack initiation and growth in Rene 88DT
12.
Simulating hydrologic systems using a physically-based, surface-subsurface model: Issues concerning flow, transport and parameterization
13.
Physically Based Modeling of Delta Island Consumptive Use A case study of Fabian Tract and Staten Island
14.
A study of hydriding kinetics of metal hydrides using a physically based model
15.
Physically-based quasi-static pore network simulator of drainage and imbibition in two and three-phase flow of immiscible fluids
16.
Generalized physically based modeling of machining processes and its verification
17.
Physically-based dynamic model for the control of cavity pressure in thermoplastics injection molding
18.
Modeling fluid migration through physically-based fracture networks
19.
Experimental And Model Study On The Effect Of Zn Content On Deformation And Precipitation Behaviors Of Al-Zn-Mg-Cu Alloy Following Thermal/mechanical Processing
20.
The Influence Of Pre-precipitation Microstructures On The Dynamic And Static Softening Behaviours Of An Al-Cu-Mg-Zr Alloy During Thermomechanical Processing
<<First
<Prev Next>
Last>>
Jump to