Font Size: a A A
Keyword [Pore defects]
Result: 1 - 20 | Page: 1 of 1
1. Study On The Blow Hole Defect Cause Of Formation And Countermeasures In Miniature Ultrathin Zinc Alloy Die Castings
2. Study On The Stability And Pore Defects Of 5083 Aluminum Alloy Laser-MIG Hybrid Welding
3. Preparation Of Porous Defects MOF-808 And Cu-BTC-Pro And Study On Catalytic Properties
4. Study On Microstructure And Properties Of TZM Molybdenum Alloy By Electron Beam Wire Deposition Additive Manufacturing
5. Porisoty Formation Mechanism And Control Of EBW 1060/2A12 Dissimilar Aluminium Alloy Seam
6. Sealing Reprocessing Of Iron-based Amorphous Coating And Its Environmental Adaptability Evaluation
7. Meso-structure And Mechanical Behavior Of 2.5D Woven SiC_f/SiC Composites
8. Multiscale Progressive Damage Analysis Of 3d Basalt Fiber Composites With Pore Defects
9. Segmentation Of Pore Defects In Metal 3D Printed Samples Based On Deep Learning
10. Research On The Process And Mechanism Of 316LN Stainless Steel By Oscillating Laser-hot Wire TIG Hybrid Welding
11. An Investigation Of Multi-scale Damage Mechanical Behaviors On Short Fiber Reinforced Composites
12. Research On The Annihilation Behavior Of Pore Defects And Evolution Of Microstructure Around Pore Defects During Hot Isostatic Pressing Of Ti6Al4V Titanium Alloy Castings
13. Study On The Influence Of Pore Defects Of Alumina Ceramics For Electric Vacuum Devices On Dielectric Breakdown
14. Characterization Of Defects And Fatigue Behavior Of Al-Mg-Sc-Zr Alloy By Selective Laser Melting
15. Study On The Process And Properties Of TiB2/AlSi10Mg Composites Fabricated By Selective Laser Melting
16. Study On Process And Properties Of TPMS Structure AlSi10Mg Alloy Fabricated By Selective Laser Melting
17. Formation Mechanism Of Microscopic Defects And Mechanical Properties Of Laser Additive-micro-polishing Co-manufacturing IN718 Alloy
18. Quantitative Identification Of Pore Defects In C/SiC Composites And Their Impact On Flexural Resistance
19. Simulation Study Of Molten Pool Morphology And Pore Defects In Laser Powder Bed Fusion Via Inconel 718 Alloy
20. Study On The Stability And Pore Defects Of Aluminum Alloy Pulsed Laser-MIG Hybrid Welding
  <<First  <Prev  Next>  Last>>  Jump to