Pressure Loss - Globe Thesis

Keyword [Pressure Loss] Result: 1 - 20 \| Page: 1 of 5
1.	Research On Transportation Mechanism And Optimization Of Vacuum Drainage System
2.	Study On Structural Optimum And Manufacture Technique Of Inlet For Hydrocyclone
3.	New Cricle Strain Type (XLL Model) The RgD Of Dust Remover
4.	Studies On The Dust Removal Performance Of Granular Desulphurization Reagent
5.	The Application And Calculation Of Oil-Water Flow Pressure Drop Model With High Water Percentage In Horizontal Pipelines
6.	Studies On The Technical Rebuilding For The Check Valve In The Blast Furnace Axial Flow Air Compressor System
7.	Study On Slim-hole Drilling Hydraulic Parameters Design
8.	Optimization Research On Drilling Parameter With Downhole Motor
9.	An Experimental Study For Oil-Water Two-Phase Flow In Horizontal Pipelines
10.	Study On Optimization Design Of Hydraulic Parameters In Ultra-deep Well Drilling Engineering
11.	The Research And Development Of Gas And Water Separation Components On Ammonia Desulfurization
12.	Dynamic Simulation Analysis And Matching Process Study For Additional Flow Rate Method
13.	Numerical Simulation Of Natural Gas Swirling Gas-Liquid Separator
14.	Ammonia Recovery Study In Flue Gas Desulphurization By Ammonia Method
15.	Numerical Simulation Of Cyclone Separator's Flow Field And Structural Improvement
16.	Effects Of TSS On Pressure Loss Of Micro-Filtration And Regeneration Of Filtration Core
17.	Research On Advancing Velocity And Parameter Optimization Of Passage Device Of Hydraulic Support
18.	Study On The Theory And Technology To Improve The Efficiency Of Oil-field Water Injection System
19.	Drilling Hydraulic Parameters Design Under Limited Mud Pump Conditions
20.	Experimental Study On Slit Nozzle Distributors Of Fluidized Bed With A Adjustable Slit Height
<<First <Prev Next> Last>> Jump to