Font Size:
a
A
A
Keyword [Reduction Ratio]
Result: 1 - 20 | Page: 1 of 2
1.
Dvelopment And Research On Hot-Continuous-Rolling Production Technics Of Big Size Steel Stick Under Small Reduction Ratio
2.
The Development Of Cold Rolling Process For Fine Grain High-strength IF Steel
3.
Study On Viscosity-average Molecular Weight And Resistance Of Poly-1-dodecene Drag Reduction Agent
4.
Drag Reduction Of Pipes And Experimental Evaluation System
5.
Drawing Process And Die On The Wire Mechanical Properties
6.
Flip Water Tank Drawing Machine In The Production Process, Process Improvement,
7.
Effect Of Cold Rolling Reduction On Mechanical Properties Of Low Carbon Al-Killed Steel Sheet
8.
Study On The Influence Of Radial Reduction Ratio And Feed Ratio On Radial Forging Quality
9.
Study On Impact Of Rolling Reduction Ratio On The Cladding Properties Of Heavy Gauge Roll-Cladding Steel Plate
10.
Research On Closure Of Void Defects In The Large Section Mold Steel Forgings
11.
Study On Microstructures And Deep-Drawabilities Of Aluminum Killed Low-Carbon Steel Sheets During Single Stand Reversing Cold Rolling
12.
Numerical Simulation And Experimental Study Of Bellows Hydroforming
13.
Effect Of Annealing Temperature On Microstructure, Textures And Properties Of High-strength IF Steel
14.
The Research On Heavy Oil Viscosity Reduction Of Sulfonate Waste Liquor Distribution System
15.
The Process Research On Vacuum Hot Roll-Cladding For 45 Steel And E690 Steel Ultra-thick Steel Plates
16.
The Effect Of First Reduction Ratio On The Interfacial Bonding Rate Of Stainless Steel Clad Plate And The Microstructure Simulation
17.
Real-time Intelligent Analysis And Evaluation Of Lifting Condition On The Rod Pumping Well
18.
Process Research On Vacuum Hot Roll-Clad Stainless Steel/Pipeline Steel
19.
Research On Microstructure And Mechanical Properties Of A356/Q235 Clad Plates Fabricated By Cast Rolling
20.
Investigation Of Piston Press Test And Static Press Work Index For Ores
<<First
<Prev
Next>
Last>>
Jump to
