Font Size: a A A
Keyword [Residual]
Result: 41 - 60 | Page: 3 of 10
41. Study Of Residual Stress Measurement Technique In Metallic Strip Using Crack Compliance Method
42. Analysis Of Interface Failure Of Thermal Barrier Ceramic Coating Under Thermo-mechanical Loadings
43. Basic Researches On The Structural Integrity And Life Prediction Of Plasma-Sprayed Coating-Based Systems Aiming For Remanufacturing
44. Reservoir Facies-Controlled Modeling & Remaining Oil Distribution Of Gasikule E31
45. Effect Of Vibration On Microstructures And Properties Of Welded Joint And Engineering Application
46. Ecological Effect By Thermal Discharged Water From Subtropical Coastal Power Plants
47. Microstructure And Mechanical Property Of The Anodic Bonding Interface Between Solid Electrolyte Glass (Ceramics) And Metals
48. The Study On High-pressure Sintering Of AlN Ceramics
49. The Research Of Large-diameter Aluminum Alloy With Series Of High Performance And Alteration Mechanism Of Residual Stress During Quenching
50. Study On Multilayer Urea Reactor Inspection And Residual Life Assessment Method
51. Study On Microstructure And Mechanical Properties Of C/C Composite And TC4 Brazed Joint
52. A Study On The Mechanism And Efficiency Evaluation Of Local Stress-relief Heat Treatment On Spherical Tanks
53. Simulational And Experimental Study On The High Speed Milling Process For Aerospace Aluminum Alloy With Multi-flutes Milling Cutter
54. Research On Fatigue Behavior Of Glass Fiber Reinforced Polymer Composites
55. Study On Fatigue Performance Of Ti Alloy High-speed-milled Under Stretching Fixation
56. Thermal Residual Stresses In Cracked Thin Aluminum Plate Repaired By Single-sided Composite Patching
57. Study On Techniques In Computer-controlled Grinding And Polishing For Large And Medium Aspheric Surfaces
58. Study On Weighted Residual Method And Boundary Element Method For Effective Thermal Conductivity Of Particulate Compostes
59. Study On Deformation Prediction Theory And Methods Of The Aerospace Thin-walled Components During Precision Milling Process
60. Research For The Key Technology Of 3D Numerical Simulation Of Plastic Injection Molding And Crystallization
  <<First  <Prev  Next>  Last>>  Jump to