Secondary phase - Globe Thesis

Keyword [Secondary phase] Result: 1 - 20 \| Page: 1 of 2
1.	Phase Equilibria And Directional Crystal Growth Of Co-Ni-Ga Ferromagnetic Shape Memory Alloys
2.	Influences Of Pulse Electric Current Treatment On The Solidification Microstructures And The Mechanical Properties Of Al-Si Piston Alloys
3.	Fine Structure Analysis Of Nb-Ti Hot-rolled Dual-phase Steel
4.	Influence Of Tertiary Component On Phase Separation In Thermoplastics/Epoxy Blends
5.	The Structure And Thermoelectric Performance Of β-Cu₂Se By The Secondary Phase Incorporating And Elements Doping
6.	Formation And Evolution Of Secondary Phase In Fe-Ni-based Alloys
7.	Influence Of Non-stoichimetry On The Structure Of CaTiO₃-NdAlO₃Based Microwave Dielectric Ceramics
8.	Research On Microstructures And Properties Of Al-Zn-Mg (Cu)alloy After Different Heat Treatment
9.	Low Temperature Sintering Of AlN Ceramics With Organized Structure Optimization
10.	Studies On Corrosion And Wear Resistances Of Liquid-phase Sintered Silicon Carbide Ceramics
11.	Influence Of Scandium On Microstructure And Properties Of 6066 Aluminum Alloys
12.	Precipitation Phase Of Super Austenitic Stainless Steel S32654 And Its Effect On Corrosion Resistance
13.	The Research On Micro Structures, Corrosion Properties And High Temperature Oxidation Behavior Of Mg-Al-Ca-Mn Alloys
14.	Stability Research Of Nanocomposite In Binary Immiscible Alloy Systems
15.	Grain Orientation And Precipitation Behavior Of Inhibitors In Hot Rolled Strip Of Hi-B Steel Produced By CSP Process
16.	The Research Of Multielement Al-Si Alloy Composition Optimization And Thermal Fatigue Properties
17.	Alloying Elements On Strengthening Phase Coarsening Behavior Of Co-8.8Al-9.8W Superalloy
18.	Study On Microstructure And Properties Of2024 Aluminum Alloy By Stationary Shoulder Frictional Stir Additive Manufacturing
19.	Study On Fatigue Properties Of 6005A Alloy Extruded Profiles For Rail Transit
20.	Effects Of Cu And/or Zn Addition On The Microstructure,Mechanical And Corrosion Behaviors Of Mg
<<First <Prev Next> Last>> Jump to