Font Size: a A A
Keyword [Sections]
Result: 1 - 20 | Page: 1 of 10
1. Simulation And Experimental Study On Residual Stresses For Multi-Stand Roll-Formed Sections
2. Research On Hydroforming Of 5A02 Aluminum Alloy Curved Thin-walled Tube With Polygonal-sections
3. Study On The Theory And Practice About Mechanized Mining Technology Of Bound Coal At Irregular Block Sections
4. The 400℃ And 550℃ Isothermal Sections Of The Phase Diagram Of The La-Ni-Fe Ternary System*
5. The Research Of The Key Technique For The PAM Equipment's Reconstruction
6. Research On Simulation And Algorithm Of Automatic Generation Of Interference-free Tool Path Of Freeform Surfaces With Curves Of Cross Sections In NC
7. Exploit Computer Program For Three-Dimensional Visualizing Serial Sections Figures Of Material Microstructure
8. The 400℃ Isothermal Sections Of The Phase Diagram Of The La-Ni-Nb Ternary System And The Electrochemical Property Of LaNi-5xNbx Alloy
9. The 500K Isothermal Sections Of The Phase Diagram Of The Ni-Pb-Sb Ternary System And Rietveld Refinement For A New Compound Al2SbY5
10. Study On Cold Roll-Forming Technique Of Metal Sections
11. The Paper Is Devided Into Two Sections As Shown Below.
12. Study Of Nanocrystal Films With Helium And Inner-shell Ionization Cross-sections Using Backscattering Spectrometry
13. Study On The Heating And Controlling Sections Of The Experimental Facility For Testing Combustible Liquid-vaporexplosion Characteristics
14. Research On Plasma Arc Welding Forming And Its Control Technique For Marine Ti Alloys With Heavy Sections
15. Study On Pollution Characteristics Of PAHs In Sediments And Suspended Solids From The Huainan And Bengbu Sections Of Huaihe River
16. Characterization Of Microbial Distribution In Sediments From Polluted Sections Of The Liao River And Primary Research On Remediation With Gene-augmentation
17. Research On Algorithm Of Automatic Generation Of Interference-free ToolPath Of Freeform Surfaces With Curves Of Cross Sections In The Machining Of The Freeform Surfaces
18. Numerical Simulation Of Chaotic Mixing In A Stirred Tank
19. Development Of Design System For Aluminum Extrusion Dies
20. The Research Of Well Hole Stability Technology Based On The Intermediate Casing Sections Of Deep Wells
  <<First  <Prev  Next>  Last>>  Jump to