Sheet - Globe Thesis - Globe Thesis

Keyword [Sheet] Result: 41 - 60 \| Page: 3 of 10
41.	Study On The Mechanism Of Penetration Mode For Thin Sheet Laser Deep Penetration Welding
42.	Microstructure Evolution And High-temperature Oxidation Behavior Of Ni-Co-Cr-Al Alloy Sheet Fabricated By EB-PVD
43.	Research On Key Technologies Of Intelligent Design In Sheet Metal Forming Processes
44.	Study On Contact And Friction In Warm Forming Of Aluminum Alloy Sheet
45.	Theoretical And Experimental Investigation Of Forming Limit Stress Diagram In Sheet Metal Forming Analysis
46.	Study On The Numerical Simulation Of Multi-point Forming Process For Retiary Sheet Metal
47.	Synthesis And Properties Of Carbon-ZnO Composites By Plasma-enhanced Chemical Vapor Deposition
48.	Study On Deep Drawing Ability And Springback Of TRIP-Aided Steel Sheet
49.	A Sheet Forming Simulation System Applied To Complete Stamping Process And Whole Development Process
50.	Numerical Simulations Of Sheet Metal Single Point Incremental Forming Process And Forming Mechanism Researching
51.	Research On Fast Simulation And Optimization Technology For The Stamping Product Design
52.	Application Of Radial Basis Function Metamodel For Optimization Of Sheet Metal Forming
53.	Study On Modeling And Quality Control Technology For Sheet Metal Forming Process
54.	Study On Fiber Reinforced Epoxy Sheet Molding Compound
55.	Design Of Ti/Ti-Al Microlaminated Sheets And Its Preparation By EB-PVD Technology
56.	Study On The Modification And Application Of Titania-based Nanobelts
57.	Study On Effects Of Metallurgical Processing On Microstructure And Properties Of Ferritic Hot-Rolled Deep-Drawing Interstitial-Free (IF) Sheet Steel
58.	Preparation, Characterization And Application Of Carbon Nano-Tubes (CNTs) Grown On Thin-sheet Sinter-locked Ni-/SS-316L-microfibers (SMF_M)
59.	Research On The Combined Forming Technology For Sheet Metal Based On Multi-point Forming & Incremental Forming Technology
60.	Study On Cold-rolled Deep-drawable Sheet Steels Based On Ferritic Hot Rolling In FTSR Line
<<First <Prev Next> Last>> Jump to