Font Size: a A A
Keyword [Shot-peening]
Result: 1 - 20 | Page: 1 of 10
1. Fundamental Study On The Hot Working And Heat Treatment Technology Of GH169 And GH696 Superalloys
2. Study On Shot Peening Of TiB2/Al Composite And Its Characterization
3. Recrystallization Behavior Of A Directionally Solidified Co-base Superalloy DZ40M
4. Effect Of Shot Peening And Rare Earth Oxide Coating On The Oxidation Resistance Of Fe-Cr Alloys
5. Study Of High Cycle Fatigue Behavior And Shot Peening Strengthening Of Zk60 And Gw103k Magnesium Alloys
6. Effect Of Surface Nanocrystallization On Fatigue Property Of Commercially Pure Titanium And Titanium Alloys
7. The Study Of Surface Nanocrystallization Of Metallic Materials By High-energy Peening
8. Study On Apparent Fatigue Limit Of Shot Peened Specimens And Optimization Of Shot Peening Technology
9. A Study On Effects Of Shot-peening On Stress Corrosion Cracking In Stainless Steel Welded Joints
10. Surface Nanocrystallization Of Commercially Pure Ti And The Thermal Stability Of Microstructures Of Surface Layers
11. Surface Nanocrystallization By Shot Peening In Commercial Shotblasting Machine
12. The Oxidation Resistance Of Surface Nanostructures In 1Cr17 Stainless Steel At High Temperature
13. Surface Nanocrystallization Of Hadfield Steel Induced By Strain And Effects Of Abrasive Wear Properties
14. Surface Nanocrystallization Of Titanium And Titanium Alloy And The Texture Properties Of Their Surface Layers
15. Pilot Study Of Surface Nanocrystallization Of A 316L Stainless Steel Fatigue Property
16. Investigation Of Microstructure And Grain Refinement Mechanism About Surface Nanocrystallization Aluminium Alloy
17. Study On The IBAD Coatings On The Surface Of Titanium Alloy And Its Fretting Fatigue Behavior At High Temperature
18. Experimental Investigation On Residual Stress Of High-Strength Steel After Shot-Peening And Its Simulation
19. Numerical Analysis Of Shot Peening Technology
20. Study On The Gas Nitriding Catalysis Process Of Mould Steel
  <<First  <Prev  Next>  Last>>  Jump to